Acer X1160Z Service Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Projector
  5. X1160Z refresh
  6. Service manual

Acer X1160Z Service Manual

Acer projector user manual
Hide thumbs Also See for X1160Z:
Table of Contents

Advertisement

Quick Links

See also: User Manual

SERVICE MANUAL

Date
2007.08.27
2008.07.09
2008.08.25
2008.10.10
Copyright October.2008. All Rights Reserved P/N: 36.88T03G001
SI :
X1160 Series/X1260 Series
X1160Z Series/X1260K Refresh
Revise Version
V1.0
V2.0
V3.0
V4.0
TSE:
Description
Initial Issue
Add X1160 Refresh/X1260 Refresh
Add X1160Z/X1160Z Refresh
Add X1260K Refresh
Check:
Approved:

Advertisement

Table of Contents
loading

Related Manuals for Acer X1160Z

Summary of Contents for Acer X1160Z

  • Page 1: Service Manual

    SERVICE MANUAL X1160 Series/X1260 Series X1160Z Series/X1260K Refresh Date Revise Version 2007.08.27 V1.0 2008.07.09 V2.0 2008.08.25 V3.0 2008.10.10 V4.0 Copyright October.2008. All Rights Reserved P/N: 36.88T03G001 SI : TSE: Description Initial Issue Add X1160 Refresh/X1260 Refresh Add X1160Z/X1160Z Refresh Add X1260K Refresh...
  • Page 2 SOR BD COLOR 70.88T11GR01 WHEEL ENGINE 70.88T12GR01 70.88T37GR01 MAIN BD 70.88T13GR01 70.88T36GR01 LAMP 70.88T22GR01 DRIVER LVPS 75.88T01G101 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh X1160Zrefresh X1160Z 35.88T03G001 35.88T01G001 48.87K01G001 49.88T01G001 51.89B04G001 51.88T24G001 75.89B02G001 75.89B01G001 80.87Y05G001 70.88T35GR01 70.88T11GR01 70.88T20GR01 70.88T38GR01 70.88T21GR01 70.89B07GR01 70.89B27GR01 70.89B43GR01 70.88T34GR01...
  • Page 3 Preface This manual is applied to X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh projection system. The manual gives you a brief description of basic technical information to help in service and maintain the product. Your customers will appreciate the quick response time when you immediately identify problems that occur with our products.

  • Page 4: Table Of Contents

    Disassemble Fan Module Disassemble Interrupt Switch Module Disassemble Lamp Driver Module Disassemble LVPS Module Disassemble Bottom Cover Module Rod Adjustment Re-write Lamp Usage Hour Assemble Bottom Cover Module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh 2-10 2-11 2-12 2-13 2-14 2-15 2-16...
  • Page 5 Beep Sound Chapter 4 Function Test & Alignment Procedure Test Equipment Needed Service Mode OSD Reset Test Condition Test Inspection Procedure PC Mode Calibration Video Performance X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-30...
  • Page 6 Chapter 6 EDID Upgrade EDID Introduction Equipment Needed Setup Procedure EDID Key-In Procedure Default Language Reset Appendix A Exploaded Overview Appendix B Serial Number System Definition PCBA Code Definition Appendix C RS232 function command summary table X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 4-11 4-12 XXIV XXV...

  • Page 7: Chapter 1 Introduction

    - Temperature control circuits with adaptive fan rotational speeds - Maximum touch temperature follow UL60950-1 Engineering Spec: - 1700 ANSI Lumens (Typical) (for X1160/X1260/X1160Z) - 1445 ANSI Lumens (Minimum) (for X1160/X1260/X1160Z) - 1800 ANSI Lumens (Typical) ( for X1160 refresh/X1260 refresh/X1160Z refresh/X1260K...
  • Page 8 Lamp door protection Projection lens Lamp life System controller Terminal X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Description Engineering Spec: - 1500 : 1 Full White and Black (Minimum; Full power mode) (for X1160/X1260/X1160Z) - 1800 : 1 Full White and Black (Typical; Full power mode) (for X1160/X1260/X1160Z) - 1400 : 1 Full White and Black (Minimum;...
  • Page 9 ● PAL (B/D/G/H/I/M/N) ● SECAM (B/D/G/K/K1/L) ● HDTV - 480i, 576i, 480p, 576p, 720p, 1080i - 225W Max - Standby < 8W at AC 110V (for X1160/X1260/X1160Z) - Standby < 5W at AC 110V (for X1160 refresh/X1260 refresh/X1160Z refresh) - 250W Max.

  • Page 10: Compatible Mode

    SXGA 1280x1024 (For X1260/X1260 re- fresh/X1260K refresh) 1280x1024 (For X1260/X1260 re- fresh/X1260K refresh) 1280x960 1280x960 QuadVGA (For X1260/X1260 re- fresh/X1260K refresh) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh V-Sync [Hz] H-Sync [KHz] Confidential 31.50 37.90 37.50 43.30 31.50 37.90 35.10 37.90 48.10 46.90...
  • Page 11 VGA Analog - Extended Wide timing Compatibility Resolution 1280x768 1280x768 1280x720 1280x768 WXGA (For X1260/X1260 re- fresh/X1260K refresh) 1280x800 1440x900 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh V-Sync [Hz] H-Sync [KHz] Confidential 48.36 60.30 44.80 68.60 49.60 59.90...

  • Page 12: Product Overview

    Product Overview Projector Outlook Front /Upper side Item Description Zoom ring (X1260 series/ X1260K Refresh) Focus ring Zoom lens Lens cap X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Item Description Power button and Power Indicator Remote controller Remote control receiver Confidential...
  • Page 13 Description PC analog signal/HDTV/component video input connector S-Video input connector Composite video input connector USB connector Power socket X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Item Description KensingtonTM lock port RS232 connector (Only for X1260 refresh/ X1260/X1260K refresh) Monitor loop-through output connector (VGA-Out) (Only for X1260 refresh/...
  • Page 14 ZOOM ASPECT RATIO KeyPad 0~9 KEYSTONE X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Description Sends signals to the projector. Power button and Power Indicator LED. Refer to the “Turning the Projector On/Off” section. • Press “MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu.
  • Page 15 Function RESYNC SOURCE HIDE Empowering FREEZE X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Description Automatically synchronizes the projector to the input source. Press “SOURCE” to choose RGB, Component, S-Video, Composite and HDTV sources. Momentarily turns off the video. Press “HIDE” to hide the image, press again to display the image.
  • Page 16 Description Power cord VGA cable Composite video cable USB cable Note: To ensure the projector works well with your computer,please make sure the timing of the display mode is compatible with the projector. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Item Description...
  • Page 17 Video decoder TVP5147 CVBS Composite Port Input USB Port Input TMP75 8051-MCU W79E804ASG For Option DC 12V Power LVPS 100~240V X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh XTAL CDCDLP223 100MHz 20MHz 512Mbits Flash DRAM CDCD5704 8 bits 400MHz 24bits Port 1 XTAL DDP2230 14.318MHz...
  • Page 18 X1260 Refresh/X1260/X1260K Refresh X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 1-12...
  • Page 19 Bottom Cover Dimension X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 1-13...

  • Page 20: Disassembly Process

    Note: 1.If you need to replace the main board, you have to get into service mode and record the lamp usage hour. please refer to section 2-18. 2.The disassembly and assembly process for X1160 Series/X1260 Series/X1160Z Series/ X1260K Refresh is the same. Here, we take X1160/X1260 as example.

  • Page 21: Disassemble Lamp Cover Module

    2-2 Disassemble Lamp Cover Module 1. Unscrew 2 screws on the lamp cover module 2-3 Disassemble Lamp Module 1. Unscrew 2 screws on the lamp module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Lamp Cover Module Lamp Module...

  • Page 22: Disassemble Top Cover Module

    Note:You’d better drop out two tenons in the back side before disassemble the top cover module.(As the red square) And then the rest of the two tenons will be spontaneously fall.(As the green square) Top Cover Module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 23: Disassemble Top Shielding

    Push the top side of bottom cover to right and push the top side of the front cover to front,then one tenon will be out.Push the front cover to above,then another tenon will be out. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 24 - Then,the left side of the front cover is the same as the right side Front Cover Module Note: Avoid touch the lens when disassem- ble the front cover. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 25: Disassemble Main Board Module & Back Cover Module

    Note:Speaker Cable(only for X1260/X1260 Refresh/X1260K Refresh)& Fan Cable must be fixed on Main Board by film tape to avoid to stretch into the Fan. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential For (X1160/X1160 Refresh/X1160Z/X1160Z refresh) For X1260/X1260 Refresh/X1260K Refresh Main Board Module&Back Cover Module...
  • Page 26 Note:Use the Long Nose Nipper to lock the hex screw nut. 3. Unscrew 2(4 for X1260/X1260 Refresh/ X1260K Refresh) hex screws on main board module & back cover module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential For (X1160/X1160 Refresh/X1160Z/ X1160Z refresh) For (X1260/X1260...

  • Page 27: Disassemble Color Wheel Module

    2-8 Disassemble Color Wheel Module 1. Unscrew 1 screw on mylar Mylar 2. Unscrew 2 screws on color wheel module 3. Unscrew 1 screw on photo sensor X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 28: Disassemble Engine Module

    2. Unscrew 2 screws on engine module to disassemble the zoom ring and zoom ring holder(X1260/X1260 Refresh/ X1260K Refresh only) 3. Unscrew 3 screws on focus ring X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Engine Module For (X1260/ X1260 Refresh/ X1260K Refresh)

  • Page 29: Disassemble Dmd Board And Dmd Chip

    Board&DMD chip module 2. Unlock the lockhole by Screw Bit(-) to disassemble the DMD chip from the DMD board Note:It will be unlocked if the Screw Bit(-) turn reverse. Contrary,It will be locked. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-10...

  • Page 30: Disassemble Speaker Module(For X1260 Refresh/X1260 Only)

    - Press the plastic of the speaker Holder and then use the tweezers to press the tenon. 2. Press two tenons to disassemble the speaker from the speaker holder Note:Avoid to press the speaker with great strenth. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Speaker holder&Speaker 2-11...

  • Page 31: Disassemble Fan Module

    2-12 Disassemble Fan Module 1. Unscrew 4 screws on the fan module Note:The fan cable pass through from the aperture. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-12...

  • Page 32: Disassemble Interrupt Switch Module

    Note: Interrupt switch cable must be pass through a dent and a aperture.And use a film tape to fix the cable in the dent. 2. Disassemble interrupt switch from interrupt switch holder X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Interrupt Switch Module Interrupt Switch&holder Film tape Dent...

  • Page 33: Disassemble Lamp Driver Module

    Note:The 3 PIN and 5 PIN cable must be pass through a Dent.(As the yellow square) 4. Unscrew 4 screws on lamp driver module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Lamp Driver to Lamp Cable 3 PIN&5 PIN Cable Lamp Driver Holder...

  • Page 34: Disassemble Lvps Module

    1. Unscrew 1 ground screw(As red circle) 2. Unscrew 1 screw on LVPS module(As yellow circle) 3. Disassemble LVPS BRKT 4. Unscrew 3 screws on LVPS module(As green circle) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential LVPS BRKT LVPS Module 2-15...

  • Page 35: Disassemble Bottom Cover Module

    - Pull aside the iron sheet with Tweezers to disassemble the ROD DUCT Note: Due to the iron sheet was out of shape,so we must turn it back before assemble the ROD DUCT. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential ROD DUCT 2-16...

  • Page 36: Rod Adjustment

    - Change the screen to “white screen.” - Adjust the screws by using the rod on the engine module to readjust the image. (adjust until the yellowish or bluish parts disappeared.) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Bottom Cover Module Screw 2 Screw 1 2-17...

  • Page 37: Re-Write Lamp Usage Hour

    - press (power > left > left > menu) to get into service mode. 2. Use left or right key to re-write the lamp hour back to previous lamp usage hour. 3. Choose exit X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Check the lamp usage hour Re-write lamp usage hour...

  • Page 38: Assemble Bottom Cover Module

    1. Fasten two tenons to assemble ROD DUCT 2. Assemble the bottom cover shielding on bottom cover module 3. Stick 1 EMI tape 4. Screw 1 screw on bottom cover module Bottom Cover shielding Bottom Cover Module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-19...

  • Page 39: Assemble Lvps Module

    2-20 Assemble LVPS Module 1. Screw 3 screws on LVPS module(As green circle) 2. Screw 1 screw to assemble LVPS BRKT (As yellow circle) 3. Screw 1 ground screw(As red circle) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential LVPS BRKT LVPS Module 2-20...

  • Page 40: Assemble Lamp Driver Module

    Note:The lamp driver to lamp cable must be pass through two Dents.(As the yellow square) 4. Plug 1 connector and screw 1 screw on lamp driver module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Lamp Driver Holder Lamp Driver Module 3 PIN&5 PIN Cable...

  • Page 41: Assemble Interrupt Switch Module

    1 film tape on interrupt switch module Note: Interrupt switch cable must be pass through a dent and a aperture.And use a film tape to fix the cable in the X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Interrupt Switch&holder dent. Interrupt Switch Module Film tape...

  • Page 42: Assemble Fan Module

    2-23 Assemble Fan Module 1. Screw 4 screws to assemble the fan module Note:The fan cable pass through from the aperture. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-23...

  • Page 43: Assemble Speaker Module(For X1260 Refresh/X1260 Only)

    Note:Avoid to press the speaker with great strenth. 2. Fasten 2 tenons(as the red square) and screw 1 (as red circle) screw to assemble Speaker Module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Speaker holder&Speaker 2-24...

  • Page 44: Assemble Dmd Board And Dmd Chip

    Note:It will be locked if the Screw Bit(-) turn obverse. 2. Assemble all components of DMD parts. 3. Screw 2 screws on engine module, assemble Heat Sink and DMD Board&DMD chip module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-25...

  • Page 45: Assemble Engine Module

    (X1260/X1260 Refresh/ X1260K Refresh) 2. Screw 4 screws to assemble the engine module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Focus Ring Zoom Ring Holder and Zoom Ring For (X1260/X1260 Refresh/X1260K Refresh) For (X1260/X1260 Refresh/...

  • Page 46: Assemble Color Wheel Module

    2-27 Assemble Color Wheel Module 1. Screw 1 screw to assemble the photo sensor on color wheel module 2. Screw 2 screws to assemble color wheel module 3. Screw 1 screw to assemble the mylar X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Mylar 2-27...
  • Page 47 X1260K Refresh) hex screws to assemble main board module & back cover module 2. Screw 1 screw on main board module & back cover module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Main Board Module Back Cover Module For X1160/X1160 Refresh/X1160Z/...

  • Page 48: Assemble Main Board Module & Back Cover Module

    Note: Speaker Cable(only for X1260)& Fan Cable must be fixed on Main Board by film tape to avoid to stretch into the Fan. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Main Board Module&Back Cover Module For (X1160/X1160 Refresh/X1160Z/X1160Z Refresh) For (X1260/X1260 Refresh/X1260K Refresh)

  • Page 49: Assemble Front Cover Module

    Fasten one tenon on bottom side,then fasten the tenon on top side of the bottom cover. - Then,assemble the right side of the front cover as the left side X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Front Cover Module 2-30...

  • Page 50: Assemble Top Shielding

    Note:Avoid touch the lens when disassem- ble the front cover. 2. Screw 1 screw on front cover module (for X1260/X1260 Refresh/X1260K Refresh) 2-30 Assemble Top Shielding 1. Screw 7 screws on the top shielding Top Shielding X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-31...

  • Page 51: Assemble Top Cover Module

    2-31 Assemble Top Cover Module 1. Assemble the top cover module on the model 2. Screw 2 screws on the unit base Top Cover Module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 2-32...

  • Page 52: Assemble Lamp Module

    2. Screw 2 screws on the lamp module 2-33 Assemble Lamp Cover Module 1. Assemble the lamp cover module 2. Screw 2 screws on the lamp cover module X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Lamp Module Lamp Cover Module 2-33...

  • Page 53: Chapter 3 Troubleshooting

    Error (Thermal Failure) Error (Fan lock) Error (Lamp breakdown) Error (Color Wheel fail) Light on X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Power LED Flash ON to OFF 100ms Quick Flashing Quick Flashing RED and Steady BLUE by returns Quick Flashing RED and Steady BLUE by returns...

  • Page 54: Main Procedure

    3-2 Main Procedure Symptom No Power Auto Shut Down No Image X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Procedure - Ensure the Power Cord and AC Power Outlet are securely connected - Check Lamp Cover and Interrupt Switch - Ensure all connectors are securely connected and aren’t...
  • Page 55 Symptom No Light On Machanical Noise Line Bar/Line Defect Image Flicker Color Abnormal X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Procedure - Ensure all connectors are securely connected and aren’t bro- - Check Lamp Module - Check Lamp Driver - Check LVPS...
  • Page 56 (Out of spec.) Garbage Image Remote Control/ Control Panel Failed Function Abnormal X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Procedure - Ensure the projection screen without dirt - Ensure the projection lens is clean - Ensure the Brightness is within spec - Check rod alignment...
  • Page 57 Symptom Forgetting Password (adminstrator Pass- word) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Procedure - An unique Universal Password which is printed on the Security Card. This unique password is a back door of Administrator Password which will be accepted by projec- tor anytime no matter what the Administrator Password is.

  • Page 58: Beep Sound

    Fan lock Overheat Lamp error Lamp Life reminding Presentation Timer (time is up) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh So(0.3s) 2 x {So(0.1s) – Off(0.1s)} per lighting failure 12s interval for each trial lighting. Max 4 times of trial 2 x {So(0.1s) – Off(0.1s)} periodically per 3 seconds, Totally 5 cycles.

  • Page 59: Function Test & Alignment Procedure

    1. After final QC step, we have to erase all saved change again and resotre the OSD default setting. The following actions will allow you to erase all end-users' settings and restore the default setting: (1) Please enter OSD menu. (2) To execute "Reset" function. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 60: Test Condition

    - Circumstance brightness: Dark room less than 5.0 lux. - Inspection distance: 1.8m~2.5m functional inspection. - Screen size: 60 inches diagonal - After repairing each X1160/X1260/X1160 Refresh/X1260 Refresh/X1160Z/X1160Z Refresh/X1260K Refresh, the unit should be run-in (refer to the table below) Symptom...

  • Page 61: Test Inspection Procedure

    1. Frequency and tracking boundry Procedure - Test equipment: video generator. - Test signal: analog 1024 x 768@60Hz - Test Pattern: general-1 or master - Check if the image sharpness is well-performed. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Color Lamp Wheel Module Lamp...
  • Page 62 - The bright blemish is unacceptable when it is more than four under gray 10 pattern - Ref. below table Note: The defect criteria follows TI specification. 3. Blemish (Dark) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Gray 10 Blue 60...
  • Page 63 - White pattern (IRE=100) - Adjacent dark pixel. Criteria - The number of the dead pixels should be less or equal to 6 pixels. - Adjacent pixel with each other is unacceptable. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential inch Full black Full white...
  • Page 64 - RGBW should all appear normal on the screen and sort from R -G-B-W. - Color levels should be sufficient and normal. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Full screen MEME Sony Master...

  • Page 65: Calibration

    - Test pattern: In focus II or 64 grey RGBW * After finishing ADC adjustment, check 64 gray RGBW pattern. Inspection item - Color sturations X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential SMPTE BAR In focus II / 64 Gray RGBW...
  • Page 66 - Color levels should be sufficient and normal. (the unidentified color levels on both left and X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential White / Black In focus 2 / 64 gray RGBW...

  • Page 67: Video Performance

    Inspection item - Video performance test Inspection Distance - 1.8M ~2.5M Criteria - Check any abnoraml color, line distortion or any noise on the screen. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Pattern Criteria Black pattern A+B=0 ( IRE=O) A+B=6 White pattern...
  • Page 68 - Test equipment: DVD player - Test signal: CVBS Inspection item - Audio performance test Inspection Distance - 1.8M ~2.5M Criteria - Check the sound from speakers. - Check “Volume” is normal - Check “Mute” is normal X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential 4-10...

  • Page 69: Optical Performance Measure

    - Follow the brightness formula to calculate brightness values. ☼ Brightness Formula Avg.(P1~ P9)x1.1m Criteria -800 lumens (for X1160/X1260/X1160Z) -900 lumens (for X1160 refresh/X1260 refresh/ X1160Z refresh/X1260K refresh) X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Full white pattern Full black pattern 4-11...

  • Page 70: Other

    - Follow the Uniformity formula to calculate average values. ANSI Uniformity = Avg. (P1, P3, P7, P9)/P5X100% Criteria - 65 % 4-10 Others 1. Functional Inspection X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential B5 = the center of black image. 4-12...
  • Page 71 Focus ring Focus ring is functioning smoothly. missing logo, missing prints and blurry prints Logo are unacceptable Screw All screw sure be fixed and in right type. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Check point 4-13...

  • Page 72: Firmware Upgrade

    - Library file (library file has to put in PC and set right path in step of 5-4-4 Firmware Upgrade Procedure) Hardware : - Projector - Power cord (42.53506G002) - USB Cable (42.87304G001) - PC or Laptop X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 73: Dlp Composer Lite Setup Procedure

    Program. 2. Click “Next” buttom. 3. Read “License Agreement”. - Choose “I accept and agree to be bound by all the terms and conditions of this License Agreement”. 4. Click “Next”. 5. Click “Next”. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 74 6. Click “Next”. 7. Click “Next”. 8. Writing system registry values. 9. Click “Finish”. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 75: Usb Driver Upgrade Procedure

    2. Execute Program (1) “Found new hardware wiszard” will be appearred on the screen. (2) Select “Install the software automatically (Recommended)”. (3) Then click “Next”. 3. Finish - Click “Finish” to end the installation. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 76 4. Click “Library”. - The library path located in the default installation directory. - E:\ Program Files\DLP Composer Lite 7.1\ library v7.1 0330. Note: If not, press “Browse” to select the right path. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential TM” file.
  • Page 77 - Click “Reset Bus” to erase the flash memory. 8. If the firmware is ready, click “start download” to process the firmware upgrade. - Click “Yes” to erase the flash memory. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh X1160-A03-07091754.img X1160 X1160 Confidential...
  • Page 78 -Unplug USB cable and power cord and replug in power cable. 10.Restart the unit and enter the service mode to check the firmware version. (To enter service mode, please refer to Chapter 4 Funcation Test and Alignment Procedure.) X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 79: Waveform Download

    (2) After flashing, LED is in steady condition and you can judge the actions as the following table: Power LED status Blue + Red (It will light on red only after 10 seconds) X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Result Fail Confidential...

  • Page 80: Edid Upgrade

    Note: If a display device has digital input ports, like DVI or HDMI, but without EDID in its main board, the display device will show no image while the input source is digital signal. After EDID upfraded, do" default language reset" X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 81: Equipment Needed

    - Generic Fixture (80.58704.001) for EDID Key-in (Fixture: JP3 must be closed) - Power cord(42.53506G002) - RS-232 Cable (pin to pin, F-M) - Monitor - PC - VGA cable(42.00201G001) - Power adapter for fixture (47.57702G001) X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 82: Setup Procedure

    "COM1", choose COM1 in the port selection. (2) Click on "Model". (3) Choose the EDID that responses to the model that you choose. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential To Analog Por RS232 Cable Adapter...
  • Page 83 5. When the EDID program for VGA is completed, a message "OK" will appear on the screen. 6. (1)In the Read item,select “Analog” and “Trans”. (2)Please press “Read” button. 7. EDID Informations will show the result. X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 84: Default Language Reset

    Note: if fail, please do the actions as above steps item (1)-(2) S/N General rule : Use the last 1 digit code (as red word) for language information Language Code (F) Default Language X1160 Series/x1260 Series/X1160Z Series/X1260K Refresh Confidential Result Fail English...
  • Page 85 Appendix A Assy Lamp Module X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 86 61.88T10G001 61.88T11G001 23.87M10G001 61.86808G001 61.83F12G001 61.83M17G001 76.83M02G002 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description LAMP RUBBER HD72 UVIR SPRING PLATE SUS301 80L LAMP CONTACT COVER RUBBER 300C SCREW PAN HEAD MECH M2.6*5 BLACK LOCK SCREW PAN MECH M3*8.5-3.5 Ni LAMP BOTTOM X1160 OSRAM P-VIP 150-180/1.0 E20.6...
  • Page 87 51.88T04G001 61.88T16G001 80.88T01G001 85.005AGG075 85.1A123G060 41.88T02G001 41.82G03G001 86.0A123G024 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description IO COVER X1160 SHIELDING MAIN-BD X1160 PCBA MAIN BOARD FOR X1160 SCREW HEX I/O #4-40*H5*L7.5 Ni NYLOK SCREW PAN MECH M3*6 NI EMI GASKET L180*W4*H1 EMI GASKET USB CONNECTOR EP719 HEX NUT M3*0.5P L2.4 Ni...
  • Page 88 ASSY ENGINE MODULE X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 89 48.87K01G001 61.88N15G001 52.88N04G001 61.88N01G001 52.88N01G001 61.88N05G001 87.FL030G008 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description FOCUS RING X1160 SCREW PAN HEAD M1.7*5 BLACK ‘’ SCREW PAN MECH M2.6*6 Ni YO PROJECTION LENS YM09XS FOR X14 PROJECTION LENS RUBBER HD65 ASSY NEW COLOR WHEEL MODULE X1...
  • Page 90 ASSY ENGINE BOTTOM MODULE X1160 item 51.88N01G001 23.88N02G001 61.88N11G001 52.88N05G001 52.85808G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description ENGINE BOTTOM COVER PC945,X15 YO MIRROR1 FOR X15 MIRROR SPRING SUS301,X15 RELAY RUBBER,X15 PORON-LENS BLACK XB31 Parts Supply...
  • Page 91 ASSY HOUSING MODULE X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 92 86.00122G015 61.88T03G001 51.88T02G001 70.83U20G001 52.86801G001 41.83C09G001 41.82B01G001 85.1A123G050 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description MYLAR FOR LVPS X1160 ROD DUCT X1160 NUT HEX M2.0*0.4P L15 Ni SHIELDING BOTTOM COVER X1160 BOTTOM COVER X1160 ASSY ADJUST FOOT MODULE TDP-T9 RUBBER FOOT REAR DP725 EMI TAPE W20*L50 EMI GASKET W13*H10.5*L30mm...
  • Page 93 75.88T03G001 70.88T01G001 85.1A323G080 70.88T02G001 51.88T05G001 61.00061G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description ASSY TOP COVER X1160 ASSY BOTTOM HOUSING MODULE X1160 SCREW PAN MECH M3*8 BLACK “GREEN” ASSY LAMP MODULE X1160 LAMP COVER X1160 LOCK SCREW PAN MECH M3*8.5-3.5 Ni...
  • Page 94 ASSY BOTTOM HOUSING MODULE X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 95 70.88T06G001 85.1A326G060 70.88T04G001 61.88T02G001 41.85A01G001 41.88T01G001 42.00454G001 85.1C224G050 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description ASSY HOUSING MODULE X1160 ASSY LVPS MATRITEK 160W XD1130 BRKT INLET X1160 SCREW PAN MECH M3*6 NI FRONT COVER X1160 ASSY ENGINE MODULE X1160(SERVI) ASSY ENGINE MODULE X1160...
  • Page 96 ASSY LAMP DRIVER MODULE X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 97 85.3A122G040 42.00422G001 42.81G01G001 42.85F01G001 75.88T05G001 51.88N25G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description HOLDER LAMP DRIVER X1160 ASSY OSRAM LAMP DRIVER 160W(O6 MIC) SCREW PAN MECH M3*6 NI SCREW CAP MECH M2*4 Ni W.A 5P 150mm LAMP DRIVER TO MB X1160 C A B L E W.
  • Page 98 ASSY FAN SHIELDING X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 99 85.1F123G260 49.88T01G001 43.88T01G001 85.1A123G060 61.88T05G001 41.83C09G001 51.88T13G001 61.88T12G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description SCREW PAN MECH E/SF M3*26 Ni SUNON, KDE1207PKV1-A 70*70*20mm AXIAL FAN THERMAL SWITCH WITH BRACKET SCREW PAN MECH M3*6 NI SHIELDING ONE FAN X1160 EMI TAPE W20*L50...
  • Page 100 ASSY COLOR WHEEL MODULE X1160 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 101 85.1A126G040 61.83628G001 52.83615G001 61.88N10G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description YO NA32R CW R90Y28G90C28W42B82 FOR P C B A P H O T O S E N S O R B O A R D F O R PD7280 SCREW PAN MECH M2.6*4 Ni...
  • Page 102 70.88T33GR01 80.89B01G001 85.005AGG075 85.1A123G060 41.88T02G001 41.82G03G001 86.0A123G024 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description IO COVER X1160 SHIELDING MAIN-BD X1160 ASSY MAIN BOARD MODULE X1160 PCBA MAIN BOARD FOR X1260 SCREW HEX I/O #4-40*H5*L7.5 Ni NYLOK SCREW PAN MECH M3*6 NI...
  • Page 103 ASSY ENGINE MODULE X1260 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...
  • Page 104 52.88N04G001 61.88N01G001 52.88N01G001 61.88N05G001 87.FL030G008 51.89B04G001 51.89B01G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description FOCUS RING X1160 SCREW PAN HEAD M1.7*5 BLACK ‘’ SCREW PAN MECH M2.6*6 Ni YO PROJECTION LENS YM09X FOR X15 PROJECTION LENS RUBBER HD65 ASSY COLOR WHEEL MODULE X1160(SERVICE)
  • Page 105 75.88T03G001 70.89B04G001 85.1A323G080 70.88T02G001 51.88T05G001 61.00061G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description ASSY TOP COVER X1160 ASSY BOTTOM HOUSING MODULE X1260 SCREW PAN MECH M3*8 BLACK “GREEN” ASSY LAMP MODULE X1160 LAMP COVER X1160 LOCK SCREW PAN MECH M3*8.5-3.5 Ni...
  • Page 106 ASSY BOTTOM HOUSING MODULE X1260 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential XXII...
  • Page 107 70.88T04G001 61.88T02G001 41.85A01G001 41.88T01G001 42.00454G001 85.1C224G050 51.89B05G001 49.80J01G001 X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential Description ASSY HOUSING MODULE X1160 ASSY LVPS MATRITEK 160W XD1130 BRKT INLET X1160 SCREW PAN MECH M3*6 NI ASSY FRONT COVER X1260 ASSY ENGINE MODULE X1260...

  • Page 108: Serial Number System Definition

    59 = Manufacturing Code 10 = Projector Version EX: EYJ5901001742000005910 This label represents the serial number for X1260. It is produced for Europe at CPC on forty-two week of 2007. Its serial code is 00000. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential XXIV...
  • Page 109 This label represents the serial number for X1260 refresh. It is produced for Europe at CPC on nineteen week of 2008. Its serial code is 00000. Note: About the discrimination between refresh model and non refresh model, please refer to RM-P-A08015. X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential...

  • Page 110: Pcba Code Definition

    PCBA Code Definition PCBA Code for Projector XXXXXXXXX Vendor Code Firmware Version Revision Date Code X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Confidential EEEE...
  • Page 111 Right Left Re-Sync Source Analog RGB for D-sub Source S-Video Source Composite Video Source Component Video Aspect ratio 16: 9 Aspect ratio 4: 3 Volume + Volume – Brightness Contrast Color Temperature Hide X1160 Series/X1260 Series/X1160Z Series Function feature Confidential...
  • Page 112 * 0 IR 043 * 0 IR 046 * 0 IR 047 * 0 IR 048 * 0 IR 049 * 0 IR 050 X1160 Series/X1260 Series/X1160Z Series Function feature Source Video: Color saturation adjustment Video: Hue adjustment Video: Sharpness adjustment...

This manual is also suitable for:

X1260X1260kX1160 seriesX1260 seriesX1160z seriesX1260k series

Table of Contents