Boiling/Hot Keep - Electrolux SMART Operating Instructions Manual
Boiling pan , 600 mm tilting height
Hide thumbs
Also See for SMART:
- Service manual (93 pages) ,
- Installation instructions manual (40 pages)
Table of Contents
Advertisement
• Confirm by pressing Menu forwards
The following text appears in the display:
DELAY
XXh XXmin
Xh XXmin XX°C
WATER XXX+XXX
AGITATOR 000rpm
When this appears in the display, the machine can
be started in the following ways:
10.
Press START
with a fixed light.
Delay to start starts to count down.
For use of agitator (See Agitator).
When the countdown to start is ready or if delayed
start has not been selected, the following text ap-
pears in the display:
BOILING
Xh XXmin XXX°C
WATER XXX+XXX
AGITATOR 000rpm
Boiling time starts when the set temperature has
been reached.
NOTE: Temperatures above 100°C cannot be
achieved and the countdown of the boiling time
does not start.
When the boiling time is over, the heating switches
off. The red LED goes out, a buzzer sounds for 2
minutes and the display
switches off, which is done in the following ways:
11.
Press STOP
.
EN | 02-2015
once.
to start. Red LED lights
flashes until the pan
DOC.N
: ST09184-02
O
OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
13.6 BOILING/HOT KEEP
(if the mat temp. sensor option has been selected)
BOILING
BOILING/HOT KEEP
BOILING/COOLING
COOLING
• Confirm the selected option by pressing Menu
forwards
once.
• Repeat steps 1-4.
The following text appears in the display:
HOT KEEP
SET TEMPERATURE
12.
Press Increase value
keeping hot temperature or press Decrease
value
to decrease the temperature.
• Confirm by pressing Menu forwards
To select the settings made without saving:
• Press Increase value
• Continued from step 13.
To save the settings that have just been made:
• Repeat step 6.
If delayed start has been selected (if the flow sensor
option has been selected)
• Confirm by pressing Menu forwards
The following text appears in the display:
DELAY
XXh XXmin
Xh XXmin XX°C
WATER XXX+XXX
AGITATOR 000rpm
When this appears in the display, the machine can
be started by:
13.
Pressing START
Red LED lights with a fixed light.
Delay to start starts to count down.
For use of agitator (See Agitator).
When the countdown to start is ready or if delayed
start has not been selected, the following text ap-
pears in the display:
BOILING/HOT KEEP
Xh XXmin XXX°C
WATER XXX+XXX
AGITATOR 000rpm
Boiling time starts when the set temperature has
been reached.
XXX°C
to increase the
once.
twice.
once.
XXX°C
to start the machine.
21
Advertisement
Table of Contents
