Table of Contents
Advertisement
en
10 | VLS 5235 | Product Description
5.8
Special accessories
Information on special accessories can be obtained
from your authorized Bosch dealer.
5.9
Important safety note
R
Do not install the lift on any asphalt surface.
R
Read and understand all safety warnings before
operating the lift.
R
Do not leave the controls while the lift is still in
motion.
R
Keep hands and feet away from any moving parts.
Keep feet clear of the lift when lowering.
R
Only these properly trained personnel can operate
the lift.
R
Do not wear unfit clothes such as large clothes with
flounces, tires, etc, which could be caught by moving
parts of the lift.
R
To prevent evitable incidents, surrounding areas of
the lift must be tidy and with nothing unconcerned.
R
The lift is simply designed to lift the entire body of
vehicles, with its maximum weight within the lifting
capacity.
R
Always insure the safety locks are engaged before
any attempt to work near or under the vehicle. Never
remove safety related components from the lift. Do
not use if safety related components are damaged or
missing.
R
Do not rock the vehicle while on the lift or remove
any heavy component from vehicle that may cause
excessive weight shift.
R
Check at any time the parts of the lift to ensure
the agility of moving parts and the performance of
synchronization. Ensure regular maintenance and
if anything abnormal occurs, stop using the lift
immediately and contact our dealers for help.
R
Lower the lift to its lowest position and do
remember to cut off the power source when service
finishes.
R
Do not modify any parts of the lift without
manufacturer's advice.
R
If the lift is going to be left unused for a long time,
users are required to:
$
Disconnect the power.
$
Empty the oil tank.
$
Lubricate the moving parts with hydraulic oil.
i
For environment protection, please dispose the
disused oil in a proper way.
5.10
Warning labels
All safety warning labels are clearly depicted on the lift
to ensure that the operator is aware of and avoid the
dangers of using the lift in an incorrect manner. The
labels must be kept clean and they have to be replaced
if detached or damaged. Please read carefully the
meaning of each label and memories them for future
operation.
|
1 697 090 700
2014-04-10
PROHIBITION1: No person under the vehicle while
operating the lift.
PROHIBITION2: Never try to lift or lower only one
platform.
PROHIBITON3: Never try to lift beyond the rated lifting
capacity.
PROHIBITION4: Only trained technicians are permitted
to operate this lift.
PROHIBITION5: Do not change, tamper or interfere with
the safety mechanisms of this lift.
PROHIBITION6: Do not shake or push the vehicle while
it is on the lift.
PROHIBITION7: Ensure feet and other parts of your
body are well clear of the lift when it is being lowered
or when lifting.
PROHIBITION8: Persons are not permitted to stand
on or sit on the platforms during the lifting process or
when the vehicle is already lifted.
CAUTION1: When the lift is lowered, no auxiliary stand
or other blocking objects should be near the lift.
CAUTION2: Always keep the lifts pit clean and clear of
any objects or contaminants.
CAUTION3: High voltage in control box, take extreme
caution here.
CAUTION4: Ensure that the lifting weight of the vehicle
is balanced on both platforms to avoid tilting or sliding.
INSTRUCTION1: The operator should not stand too
close to the lift but in a safe position away from moving
parts.
INSTRUCTION2: Please read and study the operation
manual carefully before operating this lift.
INSTRUCTION3: Keep the vehicle parallel with the
platform lifts at all times.
INSTRUCTION4: The area beneath or surrounding the
lift must be clean.Remove any oil spills immediately to
avoid risk of slipping.
Robert Bosch GmbH
Advertisement
Chapters
Table of Contents
