Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
Стр. 1 из 1 LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Page 5
Стр. 2 из 2 Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing. With this condition, the menu indication color may stick to the GRAY color or Windows may freeze if clicking other menu.
Page 6
Стр. 1 из 4 IMPORTANT NOTICE User Guide Autodesk® DWF™ Viewer is necessary to view drawings and to activate the functions of this system. Please download and install. When Windows XP SP2 is used, pop-up windows are limited by the enhanced security function and this sample may not work.
Page 7
Стр. 2 из 4 Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.628\37H... 10.05.2015...
Page 8
Стр. 3 из 4 Mouse : A mouse with wheel recommended : Microsoft Windows 2000/XP Browser Microsoft Internet Explorer 6.0 or later Drawing viewer : Autodesk DWF Viewer 6.0 * Use the software following respective license terms and conditions. Note: In case of using this service manual with network connection, allocate its folder to the client PCs as network drive to avoid any possible malfunction.
Page 9
Стр. 4 из 4 Layer Display Changing Function When any of the color buttons on the toolbar is clicked, it can be selected to display desired layer in its color or not to display each layer. This allows you to see the pattern layer only by setting other layers to "non-display".
Page 10
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
ADJUSTMENT [LCD] USA Стр. 1 из 9 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press MUTE button twice on Control. ↓ ↓ ↓ ↓ 2. Press MUTE button again and hold button down. ↓ ↓ ↓ ↓ Service Mode display 3.
Page 12
ADJUSTMENT [LCD] USA Стр. 2 из 9 Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. Selection of the adjustment items CH (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on remote control) Reset the count of operating...
Page 13
ADJUSTMENT [LCD] USA Стр. 3 из 9 (a) HOST-MICRO EEPROM data DRMA0487 (b) TV-MICRO EEPROM data DRMA0489 (2) Prior to changing any board containing an EEPROM IC, the exisiting data in each image format should be copied down as a precautionary measure. Note: (*1) DigitalCH (All format) (*2) PC or 1080I/720P ColorStream/HDMI...
Page 14
ADJUSTMENT [LCD] USA Стр. 4 из 9 77H : Movie 37 26 only all LX96 COLC COLOR CENTER C8H : Sports A0H : Standard 90H : Movie C0H : Sports (*1) 98H : Standard (*1) 88H : Movie (*1) B0H : Sports (*2) 98H : Standard (*2) 88H : Movie (*2) B8H : Sports...
Page 15
ADJUSTMENT [LCD] USA Стр. 5 из 9 00H : Standard (*4) 00H : Movie (*4) VBIS VBI Setting Closed Caption VBID 80H : ANT1/2 88H : Others Gemstar *BYBK B-Y OFF SET *RYBK R-Y OFF SET OPT1 TV SET OPTION 1 37 only all LX96 OPT2 TV SET OPTION 2...
Page 16
ADJUSTMENT [LCD] USA Стр. 6 из 9 TREC Treble center Data 26 only only EBAS Add Bass on FOCUS 37 26 only only ETRE Add Treble on FOCUS 37 26 only all LX96 WON2 Bass Reducer ALS point ALOF Reduce in ALL (wow, TruSurround) off VSTB Reduce Volume For Stable Sound...
Page 17
ADJUSTMENT [LCD] USA Стр. 7 из 9 Adjusting the Data Pressing of VOLUME button will change the value of data in the range from 00H to FFH. The variable range depends on the adjusting item. Exit from Service Mode Pressing POWER button to turn off the TV once. Self Diagnostic Function 1.
Page 18
ADJUSTMENT [LCD] USA Стр. 8 из 9 (1) Version information of TV-MICRO : Display 1 byte data. (2) Version information of TV-MICRO : Display 1 byte data. EEPROP (3) Version information of DVD MPU : HLV66, LX96 and HLV16 only (Not in used for HL66, HL196 and LX196) (4) Version information of DMD Engine : LCD Model not used.
Page 19
ADJUSTMENT [LCD] USA Стр. 9 из 9 indicate the TV's status, as described below: Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable.
Page 20
Стр. 1 из 2 FUNCTION AND OPERATION TV Front and Side Panel Control and Connection file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.670\37H... 10.05.2015...
Page 21
Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.670\37H... 10.05.2015...
Стр. 1 из 4 FUNCTION AND OPERATION Learning about the Remote Control file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.093\37H... 10.05.2015...
Page 23
Стр. 2 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.093\37H... 10.05.2015...
Page 24
Стр. 3 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.093\37H... 10.05.2015...
Page 25
Стр. 4 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.093\37H... 10.05.2015...
Page 26
Стр. 1 из 4 FUNCTION AND OPERATION Programming Channel into the TV's Channel Memory Programming Channel Automatically file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.718\37H... 10.05.2015...
Page 27
Стр. 2 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.718\37H... 10.05.2015...
Page 28
Стр. 3 из 4 Manually Adding and Deleting Channel in the Channel Memory file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.718\37H... 10.05.2015...
Page 29
Стр. 4 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.718\37H... 10.05.2015...
Page 30
Стр. 1 из 2 FUNCTION AND OPERATION Programming Your Favorite Channel file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.893\37H... 10.05.2015...
Page 31
Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.893\37H... 10.05.2015...
Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 33
Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 34
Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 35
Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.755\37H... 10.05.2015...
SAFETY INSTRUCTION [LCD] USA Стр. 1 из 3 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 37
SAFETY INSTRUCTION [LCD] USA Стр. 2 из 3 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
SAFETY INSTRUCTION [LCD] USA Стр. 3 из 3 limit constitutes a potential shock hazard and must be corrected immediately. Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 60
Стр. 2 из 2 All capacitors are ceramic 50 V, unless otherwise noted as the following marks. = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4.
Page 155
Accessory Стр. 1 из 1 Accessory Location Parts No. Description K902 75003469 REMOCON HAND UNIT FOR HLV16 AND HLV66, CT-90259A Y101 75002982 OWNERS MANUAL, INST REV1 Y102 75002667 OWNERS MANUAL, ENG/FRE Y109 23945015 BAG, POLYETHYLENE COVER 250X400 Y170 23845800 HOLDER, WIRE, NYLON66 D6.8 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.369\37H...
Page 156
Cabinet Стр. 1 из 1 Cabinet Location Parts No. Description A201 75002680 FRONT BEZEL A315 75002076 PIECE, C COVER ASSY A320 75002342 PIECE, FRONT AV ASSY A340 75001920 PIECE, BUTTON 7 KEY A380 23717240 SCREW, BITTB3X10SZN A401 75002679 BACK COVER A411 23717267 SCREW, BITTB4X16 SBN...
Page 157
Miscellaneous Стр. 1 из 1 Miscellaneous Parts Location Description B001 75003544 DISPLAY , T370XW01 V2 (B) BD01 75002659 DVD PLAYER/RECORDER, RL-SL2003 (T1) CN61A 75002683 CONNECTOR, 1MM PITCH B TO B, 237702150K4 E104 23390004 EMI GASKET, SSTG0.5-4 E105 23390004 EMI GASKET, SSTG0.5-4 H003C 23747055 NUT, F-CONNECTOR 2H BS H003E...
Page 158
Packing Стр. 1 из 1 Packing Location Parts No. Description A701A 75002682 CARTON BOX, TOP A701B 75002571 CARTON BOX, BOTTOM A702A 75002572 PACKING, TOP PAD A702B 75002573 PACKING, BOTTOM PAD A703 23945216 BAG, LAMIFILM BAG 42HP84 42HP84:S1304D121 A705 23518043 PACKING, JOINT, 32Z5P A709 75002346 PACKING, CENTER PAD...
Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 160
Стр. 2 из 2 : Electrolytic : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.536\37H... 11.05.2015...
Page 168
U01A AV (PE0036) Стр. 1 из 6 Loading ... Location Parts No. Description U01A 75002650 PC BOARD ASSY, PE0036B1, AV C401 76092730 CERAMIC CHIP, 16V B 0.1UF K C402 76092730 CERAMIC CHIP, 16V B 0.1UF K C403 76105181 CERAMIC CHIP, 50V CH 180PF J C601 76092730 CERAMIC CHIP, 16V B 0.1UF K...
Page 169
U01A AV (PE0036) Стр. 2 из 6 C1811 76619102 ELECTROLYTIC CHIP, 16V 47UF M C1812 76092616 CERAMIC CHIP, 16V B 0.33UF K C1815 76100104 CERAMIC CHIP, 25V F 0.1UF Z C1816 76100104 CERAMIC CHIP, 25V F 0.1UF Z C1817 76109102 CERAMIC CHIP, 50V B 1000PF K C1819 76105102...
Page 170
U01A AV (PE0036) Стр. 3 из 6 CA46 76092883 CERAMIC CHIP, 50V B 0.1UF K CA200 76092883 CERAMIC CHIP, 50V B 0.1UF K CA201 76092883 CERAMIC CHIP, 50V B 0.1UF K CA202 76092883 CERAMIC CHIP, 50V B 0.1UF K CA203 76092883 CERAMIC CHIP, 50V B 0.1UF K CC01...
Page 171
U01A AV (PE0036) Стр. 4 из 6 CG01 76088098 TANTAL CHIP ELEC., 16V 10UF M B2-CA CG02 76092784 CERAMIC CHIP, 10V B 0.33UF K CG03 76088907 TANTAL CHIP ELEC., 16V 3.3UF M A-CAE CG04 76092883 CERAMIC CHIP, 50V B 0.1UF K CG05 76109223 CERAMIC CHIP, 25V B 0.022UF K...
Page 172
U01A AV (PE0036) Стр. 5 из 6 CS15 76105101 CERAMIC CHIP, 50V CH 100PF J CS16 76105101 CERAMIC CHIP, 50V CH 100PF J CS17 76092795 CERAMIC CHIP, 6.3V B 2.2UF K CS18 76092795 CERAMIC CHIP, 6.3V B 2.2UF K CS19 76105101 CERAMIC CHIP, 50V CH 100PF J CS20...
Page 173
U01A AV (PE0036) Стр. 6 из 6 CS123 76092730 CERAMIC CHIP, 16V B 0.1UF K CS124 76092731 CERAMIC CHIP, 16V B 1UF K CS125 76092731 CERAMIC CHIP, 16V B 1UF K CS126 76109822 CERAMIC CHIP, 50V B 8200PF K CS127 76092616 CERAMIC CHIP, 16V B 0.33UF K CS128...
Page 174
U01B F-AV (PE0036) Стр. 1 из 1 U01B F-AV (PE0036) Location Parts No. Description U01B 75002651 PC BOARD ASSY, PE0036B2, F_AV CC11 76109102 CERAMIC CHIP, 50V B 1000PF K CC12 76109102 CERAMIC CHIP, 50V B 1000PF K CV122 76105101 CERAMIC CHIP, 50V CH 100PF J GR605 76000445 CHIP JUMPER, 1608TYPE...
Page 175
U01C LED (PE0036) Стр. 1 из 1 U01C LED (PE0036) Location Parts No. Description U01C 75002652 PC BOARD ASSY, PE0036B3, LED CB01 76202221 ELECTROLYTIC, 10V 220UF M CB02 76202221 ELECTROLYTIC, 10V 220UF M CB03 76100104 CERAMIC CHIP, 25V F 0.1UF Z CB04 76100104 CERAMIC CHIP, 25V F 0.1UF Z...