Advertisement
Problem
Possible cause
Steam does
Steam lock function is
not stop
activated.
automatically
after placing
the steamer
head onto the
holder.
The board
Steam has condensed
cover becomes
on the board cover
wet or there
after a long steaming
are water
session.
droplets on
the garment
during
steaming.
Board is shaky
The poles are not
during use.
installed properly or
the board is not
secured onto the
poles.
The board lock is not
fully inserted.
The board is not fully
secure in vertical
position.
Board cannot
The board lock is not
be tilted or be
locked onto the pole.
used in
horizontal
position.
Solution
Press once to deactivate steam
lock ( refer to
).
Leave it to dry before storage.
Replace the board cover if it has
worn out. Purchase a new board
cover from a Philips Authorized
Service Center.
Refer to
for correct
installation.
Insert the two board locks fully
until you hear a "click" sound
( refer to
).
Make sure that the board tilting
lever is in a locked position
before attaching it to the poles
).
( refer to
Ensure that the board lock is in a
locked position ( refer to
).
31
Advertisement
