Page 1
Building Networks for People Quick Installation Guide 5G/LTE Outdoor CPE This document will guide you through the basic installation process for your new D-Link Outdoor CPE DWP-1010 Quick Installation Guide Documentation also available on the D-Link Website...
Page 2
RJ-45 Ethernet Cable (15 m) for connection Important Information between the DWP-1010 and the PoE Injector This product should ONLY be installed by RJ-45 Ethernet Cable (1 m) for connection an experienced installer who is familiar with between the PoE Injector and an indoor local building and safety codes and, where CPE (a home router, witch, etc.)
Page 3
Gland 1. Separate the sealing cap and sealing insert of the waterproof connector. Before fixing the DWP-1010 onto a wall, 2. Insert the RJ-45 connector to the PoE port supply power to the device with the PoE by threading an Ethernet cable through...
Page 4
Signal Strength Besides using site survey, you can obtain general signal strength information with the aid of LED indicators on the side of the DWP-1010. PoE Injector Signal 5G/4G/3G LAN Port PoE Port 1.