Sony VPL-CX75 Operating Instructions Manual page 21
Air shot
Hide thumbs
Also See for VPL-CX75:
- Operation instructions manual (72 pages) ,
- Operating instructions manual (30 pages) ,
- Service manual (129 pages)
Table of Contents
Advertisement
Symptom
The projector is displayed in
the main window of Projector
Station for Air Shot but the
projector cannot be connected.
The computer and projector
are connected in the main
window of Projector Station
for Air Shot but the image
cannot be projected on the
projector.
The image displayed on the
projector is different from that
of the computer.
Cause and Remedy
• [Function Limit] in [Option] is set to [On].
c Set to [Off]. When [Function Limit] is set to [On], the
projector cannot be connected or disconnected by the
computer.
• When the computer is connected to the projector using the USB
wireless LAN module, the USB wireless LAN module is
disconnected.
c Restart Windows and Projector Station for Air Shot and
connect the USB wireless LAN module.
Note
Before disconnecting the USB wireless LAN module, disconnect
the computer and projector.
• The projector is set to a picture muting.
c Press the PIC MUTING key on the remote commander to
release the muting.
• INPUT C (VPL-CX85) or INPUT B (VPL-CX75) is not
selected on the projector.
c Press the AIR SHOT key on the remote commander or select
INPUT C (VPL-CX85) or INPUT B (VPL-CX75) using the
INPUT button.
• [Memory Stick] is selected in INPUT C (VPL-CX85) or
INPUT B (VPL-CX75).
c Press the AIR SHOT key on the remote commander.
• The following application softwares or screen saver may not be
transported correctly.
– Application software that uses DirectX
– Application software that plays back a movie
– Microsoft Office assistant
– Microsoft IME tool bar
– Tool tip displayed by mouse over
• [Resolution Switching] in [Option] is set to [PC Setup] and the
image of the computer is displayed in a higher resolution than
the XGA.
c An image on the projector is deteriorated when the computer
is set to a higher resolution than the XGA .
• The resolution of the computer image and user switching in the
user simple switching display are done while connecting
(Windows XP).
c Disconnect and reconnect the computer and projector.
Note
Disconnect the computer and projector, and then switch the
resolution of the computer image or change the user by user
simple switching.
21
Other
Hide quick links:
Advertisement
Table of Contents
