Advertisement
Quick Links
Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
Fast & powerful crease removal
• Soleplate: SteamGlide
• OptimalTemp
• Continuous steam output
• Continuous steam output: 120 g/min
• Steam boost: 180 g
• Vertical steam
• Steam pressure: Up to 5 bar
• Steam tip
• Power: 2400 W
Easy to use
• Water tank capacity: 2200 ml
• Filling and emptying water: Extra large filling hole
• Refill any time
• Heat-up time: 2 min
• Hose storage: Hose storage compartment
• Power cord length: 1.8 m
• Hose length: 1.6 m
• Safe for all fabrics: Even for delicates like silks
• Low water alarm
Published by Philips Consumer Lifestyle
12/07
Calc management
• Suitable for tap water
• Calc clean solution: Easy De-calc
• Calc clean reminder
Safety Information
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as officially laid down at this moment.
Printed in the Netherlands
PerfectCare Aqua
© Copyright reserved
GC8620
Subject to modification
Advertisement
Related Manuals for Philips GC8620
Summary of Contents for Philips GC8620
- Page 1 • Power cord length: 1.8 m • Hose length: 1.6 m • Safe for all fabrics: Even for delicates like silks • Low water alarm Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification...
-
Page 2: Technical Information
Soleplate: Steam Glide New SteamGlide soleplate is the best Philips soleplate. It has great scratch resistancy, glides excellent and is easy to clean. OptimalTemp Technology... - Page 3 GC8620 DISASSEMBLY ADVICE - IRON LIGHT STRIP CAP ASSY 1 Remove Screw B Disassemble INLAY AND LIGHT STRIP ASSY 2 INLAY AND LIGHT STRIP ASSY 2 Disassemble REFLECTOR MOLDED 3 Remove Screw C REFLECTOR MOLDED 3 Disassemble LED MICROSWITCH HOLDER...
- Page 4 GC8620 PARTS LIST - IRON Service code Description 4239 021 70734 Light strip cap assy 4239 021 70843 Inlay and light strip assy 4239 026 49561 Refl ector molded 4239 021 71942 LED microswitch holder assy 4239 014 54961 Trigger spring...
- Page 5 GC8620 EXPLODED VIEW - IRON Rubber pad Rubber bung E1 E2 5-12...
- Page 6 GC8620 DISASSEMBLY ADVICE - STAND FILLING DOOR MOLDED 17 RINSE CAP ASSY 24 TRAY RUBBER CAP 19 SAFETY CAP 25 TRAY CAP MOLDED 20 INOX CLAMP 26 TRAY PRINTED 21 BRAIDED RUBBER HOSE BOILER 27 WATER TANK ASSY 23 ELECTROVALVE 28...
- Page 7 GC8620 DISASSEMBLY ADVICE - STAND POWER BUTTON PRINTED 37 BUTTON FRAME PRINTED 38 POWER BOARD PCB-PUMP SERVICE KIT 39 POWER CORD EU 40 STAND BOTTOM MOLDED 41 Remove Screw N1, N2, N3, N4, N5 Disassemble WATER TANK ASSY 23 Remove...
- Page 8 GC8620 EXPLODED VIEW - STAND 8-12...
- Page 9 GC8620 EXPLODED VIEW - STAND 9-12...
- Page 10 GC8620 WIRING DIAGRAM STAND Earth Inter- Pump connection Boiler Earth WA20 : HE (N) Thermistor - Fuse (N) Point WA19 : HE (L) - Fuse (L) WA7 - PCB to EV-Ctrl Thermal Fuse E-valve Thermal Fuse WA5 : Fuse (L) - PCB...
- Page 11 GC8620 WIRING DIAGRAM IRON Trigger micro-switch Iron Thermistor Iron Heater JST eSL 3-way Iron Earth wite-to-wire connector Point Thermal Fuse IRON Mid-air crimp connection Hosecord (to Stand) 11-12...
-
Page 12: Repair Instructions
GC8620 REPAIR INSTRUCTIONS • Due to the high wattage of the iron, only the specified cord set must be used. • Should damage be observed on the HOSE-CORD ASSY 14 or CORDSET 40, they must be replaced. Continued usage is not allowed.