SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries.
SAFETY RULES Safe Operation Practices for Ride-On Mowers IV. TOWING • If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting. • Tow only with a machine that has a hitch designed for • Never make any adjustments or repairs with the engine towing.
KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others.
ASSEMBLY 3. Align support assembly pin with hole in drawbar and BAGGER SUPPORT ASSEMBLY hang assembly over the shoulder bolts. (See Figs. 1A, 1B, 1C) 4. Be sure support assembly is seated properly and secure with retainer spring supplied. 1. Remove and discard the upper bolt on both sides of SHOULDER BOLTS the drawbar.
Page 6
CONTAINER ASSEMBLY (See Fig. 3) CONTAINER MOUNTING (See Fig. 4) 1. Place bottom half inside of top half, as shown. 1. Install one container to left side fi rst with warning to outside of unit. Install another container to center 2.
Page 7
LOWER CHUTE - MOWER WITH MOUNTING TAB (See Fig. 5A) 1. Raise and hold defl ector shield in upright position. 2. Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as shown. 3.
Page 8
LOWER CHUTE - MOWER WITHOUT PLACE LOWER REAR EDGE OPTIONAL BETWEEN GAUGE WHEEL MOUNTING TAB (See Fig. 5B) GAUGE BRACKET TAB AND WHEEL MOWER HOUSING, THEN HOOK REAR LATCH 1. Lower mower deck to its lowest cutting position. BRACKET NOTE: If equipped, remove mulch cover from mower deck and store in a safe place.
Page 9
UPPER CHUTE (See Figs. 6A & 6B) INSTALL CROSS BLADES (See Fig. 7) 1. Lower mower to its lowest cutting position. New Blade Bolts supplied 2. Assemble upper chute by inserting curved end into The blade mounting bolts provided in this kit must be used hole in back of cover.
OPERATION • Avoid cutting wet grass or in the morning while the dew TIPS FOR IMPROVED BAGGING is still heavy. Grass clippings collected under these OPE RA TION: conditions tend to be sticky and adhere to the walls of Follow the mower operation instructions in your tractor the fl...
CUSTOMER RESPONSIBILITIES STORAGE GENERAL RECOMMENDATIONS When grass catcher is to be stored for a period of time, Always observe safety rules when performing any main- clean it thoroughly, remove all dirt, grass, leaves, etc. Store te nance. in a clean, dry place. •...
REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL NUMBER CES342B / RAMASSE-HERBE - NO. DE MODÈLE CES342B PRODUCT NO. 954 04 05-03 / NUMÈRO DE PRODUIT 954 04 05-03...
Page 13
REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL NUMBER CES342B / RAMASSE-HERBE - NO. DE MODÈLE CES342B PRODUCT NO. 954 04 05-03 / NUMÈRO DE PRODUIT 954 04 05-03 PART DESCRIPTION PART DESCRIPTION 532401047 Adapter Côtés 532198364 Support Assembly Ensemble du support...