Disconnecting The Portable Port Expander - Fujitsu Point 1600 User Manual

Connectivity peripherals

Hide thumbs Also See for Point 1600:

Installation manual (52 pages)

Product reference (2 pages)

User manual (48 pages)

Table Of Contents

Table of Contents

Turn on the peripheral devices attached to the portable port expander.

Start the pen tablet or, if you suspended the pen tablet, resume system

operation.

Note:

If the required driver software for an attached peripheral device is not installed,

the device may not work or may work incorrectly. Contact your local help desk or

refer to the documentation provided with your peripheral device and install the

driver software at this time.

You can now use your pen tablet with the peripheral devices attached to the portable

port expander.

Note the following when using the portable port expander:

• The ability of the pen tablet to utilize ports on the portable port expander is

determined by BIOS configuration settings. Contact your local help desk or

reseller if you suspect that your pen tablet's BIOS settings are preventing the

portable port expander from working properly.

• Point 510 only: Due to the size and location of the portable port expander when

attached to the pen tablet, the portable port expander blocks the IrDA port on the

bottom of the Point 510 pen tablet. Therefore, the IrDA port is inoperable when

the portable port expander is attached. Also, note that serial port B and the IrDA

port share the same system resources, so the IrDA port is unavailable if your

system is configured to use serial port B.