■ Optical Parts Disassemblies
Before taking this procedure, remove Cabinet Top and Main Board following to the "Mechanical Disassemblies".
Disassembly requires a 2.0mm hex wrench and a screwdriver.
Projection Lens removal
1
Remove the Front Panel following to "Front Panel Removal" on "Mechanical
Disassemblies".
2
Remove 4 screws to take the Projection Lens ass'y off.
Integrator Lens-In disassembly
1
A
Remove 2 screws
and pull the Integrator Lens-In ass'y upward.
2
B
Remove 1 stoppers
A
A
and then take the Lens off from the holder.
Fig.2-
Integrator Lens
* Lens should be placed as the
rugged surface side comes to
the holder side.
1
-14-
Fig.1
B
Stopper
Fig.2-
2