Page 1
User’s Guide ake sure to read the before using the product. Keep the User's Guide(CD) in an accessible place for future reference. ee the label attached on the product and give the information to your dealer when you ask for service.
Page 2
On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
Page 3
On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Connecting the stand Place the monitor with its front facing downward on a soft cloth. Assemble the Stand Body into the product in the correct direction as shown in the picture. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. However, the body of the stand will be fixed firmly only when it is connected to the base.
Disassembling the stand Put a cushion or soft cloth on aflat surface. Pushing Latch inside, Take the stand base from stand body. Please pull the stand body lightly to separate it from the hinge body. Place the monitor face Down on the cushion or soft cloth.
Using the Computer Make sure to turn off the computer and product. Connect the cable as below sketch map form Connect DVI Cable Connect Dsub Cable (PC) Connect Dsub Cable (Mac) Press button on the front switch panel to turn the power on.
Screen Adjustment Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. To access a control, use the - or + Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button.
Page 11
The order of icons may differ depending on the model (A10~A15 ).
Page 12
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Page 15
Main menu Sub menu Description WIDE * 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.) 1280x1024 5 : 4 1152x864 4 : 3 1024x768...