Sony SU-PW3M Instructions (SU-PW3M Wall-Mount Bracket) Instructions Manual page 12
Speakers/stands: wall-mount bracket for kde-37xs955, kde-42xs955, and kde-50xs955
Hide thumbs
Also See for SU-PW3M Instructions (SU-PW3M Wall-Mount Bracket):
- Installation manual (17 pages) ,
- Instructions manual (116 pages)
Advertisement
Available languages
Available languages
4
Install the Mounting Rack (with
the TV) onto the Plate Unit.
1 Hold the Mounting Rack so that the two
center notches on either side touch the
support braces of the Plate Unit.
2 Gradually lift the Mounting Rack and TV
upward keeping the center notches engaged
with the support braces of the Plate Unit.
Hitch the upper left and right hooks of the
Mounting Rack onto the anchor bars at the
top of the left and right stabilizer arms of the
Plate Unit.
3 Confirm the four upper hooks are firmly
hooked onto the two anchor bars of the Plate
Unit and that the support braces are secured
in the center notches of the Mounting Rack.
4 Firmly tighten all four upper and lower
screws (+B6 L20, supplied) on each side of
the Mounting Rack.
2
1
Side view
Plate Unit
Support brace
12
(US)
Mounting Rack
Mounting Rack
with the TV
2
1
Right side
Confirm the completion
of the installation
Check the following points.
• Four upper hooks of the Mounting Rack are
firmly hooked onto the two anchor bars of
the Plate Unit.
• The cord and the cable are not twisted or
pinched.
• All the securing screws (+B6 L20, supplied)
are tightened.
WARNING
Incomplete installation may cause the product falling
and result in injury or product damage. Also, improper
placement of the AC power cord, etc., may cause fire or
electric shock through a short circuit.
Be sure to confirm the completion of the installation for
safety.
4
Screws
(+B6
L20, supplied)
Advertisement
