Download Print this page

System Settings; Main Menu; System Settings Menu; Sequence - Bosch VSS8394/01T Installation Instructions Manual

Hide thumbs Also See for VSS8394/01T:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
VSS8394/01T Multiplexer | Installation Manual | Chapter 2
Select YES to start the wizard setup. The wizard
setup enables you to configure the system to your
own settings and guides you through the process
automatically.
Select NO to enable the system to automatically con-
figure itself to the factory default settings.
Note
For detailed information on the on screen menus refer
to the System Settings Part.
When completed the following screen will appear:
C O N F I G U R A TIO N
W I ZA R D
C O M P L ETE D

2.4 SYSTEM SETTINGS

The system settings can be configured to your own
requirements. The system is setup via on-screen menus.
To access the menu options:
Press the MENU button. Toggle to switch on/off.
The ROTARY wheel controls the menu navigation as
described in the Operation Instructions.
At the end of this chapter you will find the complete
menu structure in a diagram.

2.4.1 Main Menu

After pressing the menu button the following menu will
be displayed:
MAINMENU
HISTOR Y
SWITCH TO PLAYBACK VIEW
VIEW SETTINGS
TIME / DATE
SYSTEM SETTINGS
Note
HISTORY, SWITCH TO PLAYBACK VIEW,
VIEW SETTINGS and TIME/DATE functions are
described in detail in the Operation Instructions.
Remark
After entering the system settings, alarms are disabled.

2.4.2 System Settings Menu

With the System settings menu you can configure the
system according to your own requirements.
Configurations that can be changed are:
Bosch Security Systems | 2003-06
All manuals and user guides at all-guides.com
Select system settings from the main menu and the fol-
lowing menu will appear:
MAIN MENU
SYST EM SET T I NGS

SEQUENCE

ALARMS

AUX-OUTPUT
R E C O R D E R
REMOTE SUR VEILLANCE
INST ALLATION
SER VICE
2.4.3 Sequence
You can change the sequence dwell time from 01 sec to
30 secs. Sequence/dwell time is the length of time an
image is displayed before the next image in the
sequence is shown.
MAIN MENU
SYSTEM SETTINGS
S EQU ENCE
DWELL TIME
2.4.4 Alarms
The Alarm Profiles can be accessed from the Alarm
menu.
MAIN MENU
SYSTEM SETTINGS
ALARMS
ALARM DURATION
AUTO ACKNOWLEDGE
ALARM PROFILE DAY
ALARM PROFILE NIGHT
DAY / NIGHT SWITCH
EVENT REPLAY
ALARM
DURATION
0 5
S E C
0 5 S EC
OFF
NONE
ON
This defines the period of time (5
sec. to 15 min.) that the alarm
beeper and the alarm relay are acti-
vated, unless the operator acknow-
ledges the alarm.
EN | 6

Advertisement

loading