Section 3 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically
from your Internet Service Provider (ISP). Select this option if your ISP does not
specify an IP address to use.
Advanced Settings
The host name is optional but may be required by some ISPs. Leave
Host Name:
it blank if you are not sure.
Enter the primary DNS server IP address assigned by your ISP. This
Primary DNS
address is usually obtained automatically from your ISP.
Server:
Enter the secondary DNS server IP address assigned by your ISP. This
Secondary DNS
address is usually obtained automatically from your ISP.
Server:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP.
The default MAC address is set to the physical interface MAC address
MAC Address
of port 1 on Covr Point A. You can use the drop-down menu to replace
Clone:
the Internet port's MAC address with the MAC address of a connected
client.
Click Save when you are done.
D-Link COVR-C1203 User Manual
Dynamic IP (DHCP)
18