Page 1
OLED TV ENGLISH Easy Setup Guide 65WU960H Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
Page 2
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •...
Page 19
Warning! Safety instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or CAUTION other materials while unit is plugged in.
Page 20
Otherwise, this may result in electric shock or • Use only an authorized attachments / accessories product damage. approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
Preparing Optional Extras • When the TV is turned on for the first time after Optional extras can be changed or modified for quality being shipped from the factory, initialization of the improvement without any notification. Contact your TV may take approximately one minute. dealer for buying these items.
Lifting and Moving the TV • When transporting the TV, do not expose the TV to jolts or excessive vibration. • When transporting the TV, keep the TV upright; When moving or lifting the TV, read the following to never turn the TV on its side or tilt towards the left prevent the TV from being scratched or damaged and or right.
Page 23
• Check the material of the wall and the thickness of • Do not apply foreign substances (oils, the finishing. lubricants, etc.) to the screw parts when • Use the Wall mount anchor for wall material of assembling the product. (Doing so may concrete, light concrete, strong natural stone, soft damage the product.) natural stone masonry brick and hallow block that...
How to attach to masonry walls • When installing the wall mount, check the positions of the wooden studs using a stud finder. Then, fasten Please follow the below direction. the screws on at least two separate studs before 1 Use a drill bit Ø 8 mm (0.3 inches) to drill a hole proceeding.
Page 25
• When mounting a TV on the wall, make sure • If you want to connect the TV Cable is not to install the TV by hanging the power and connected to the back panel partition, please signal cables on the back of the TV. use the enclosed Punching Guide.
Using the kensington security system • Complete all connections between devices, and then connect the power cord to the power outlet to (optional) prevent damage to your TV. • To improve the picture quality in a poor signal area, The Kensington security system connector is located purchase a signal amplifier.
External Speakers • Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. External Devices Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
Using the Button Network setup Wired network connection You can simply operate the TV functions, using the button. This TV can be connected to a Pro:Centric server via port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the...
Page 29
Using Magic Remote Control (Some buttons and services may not be provided depending upon models or regions.) * To use the button, press and hold for more than 3 The descriptions in this manual are based on the seconds. buttons on the remote control. Please read this manual carefully and use the TV correctly.
The customer is responsible to ensure To use the Magic Remote, first pair it with your TV. the compatibility of their equipment with any LG 1 Put batteries into the Magic Remote and turn the Electronics software. If needed, please consult with TV on.
Page 31
• [Sports] Optimized picture mode for sports matches. - Displaying a still image for a prolonged period of time may cause an image sticking. Avoid The pitch and kits are presented in vibrant colors, displaying a fixed image on the TV screen for a with crystal-clear images even for fast movements.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). Broadcasting Specifications Television system ATSC, NTSC-M, 64 &...
Page 33
HDMI (PC) supported mode HDMI (DTV) supported mode Horizontal Vertical (Use HDMI IN 1 for PC mode) Resolution Frequency (kHz) Frequency (Hz) Horizontal Vertical Resolution 31.46 59.94 Frequency (kHz) Frequency (Hz) 640 x 480p 31.50 60.00 640 x 350 31.46 70.09 31.47 59.94...
My Media Supported Files Supported Video Formats • External supported subtitle formats: *.smi, *.srt, Extension Codec *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt VC-1 Advanced Profile (Except (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) for WMVA), VC-1 Simple and Video .asf •...
Page 35
Important Information for Information on Functions Supporting Image Quality in Relation Preventing Image Retention to Temporary Image Retention OLED is a self-emissive technology, which brings many • OLED TV offers a function called Pixel Refresher, significant benefits to image quality and performance. which helps to prevent temporary image retention.
Page 36
KEY CODES * This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Wheel (Up) R/C Button R/C Button (Q.Settings) Wheel (Down) R/C Button R/C Button (Screen Remote) R/C Button (Dash) R/C Button R/C Button R/C Button (Home) R/C Button...
Page 37
USB to Serial converter with USB Cable USB Type (TV) (PC) • LG TV supports PL2303 chip-based (Vendor ID : 0 x 0557, Product ID : 0 x 2008) USB to serial converter which is RS-232C IN not made nor provided by LG. (CONTROL & SERVICE)
Page 38
Connector type : D-Sub 9-pin male RS-232C (Serial port) RS-232C configurations 7-Wire Configurations 3-Wire Configurations (Standard RS-232C cable) (Not standard) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID For Set ID number, see “Real data mapping (Hexadecimal : Decimal)”. 1 Press (Q.Settings) ( ) to access the main menus.
Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list COMMAND1 COMMAND2 DATA (Hexadecimal)
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon model) Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1) : First command to control the TV. (j, k, m or x) (Command 2) : Second command to control the TV. ([Set ID]) : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
Page 41
1 Power (Command: k a) 3 Screen Mute (Command: k d) ► To control power on or off of the set. ► To select screen mute on/off. Transmission Transmission (k)(a)( )([Set ID])( )(Data)(Cr) (k)(d)( )([Set ID])( )(Data)(Cr) Data 00 : [Off] Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : [On] Data 01 : Screen mute on (Picture off)
Page 42
7 [Brightness] (Command: k h) 11 [OSD] Select (Command: k l) ► To adjust screen brightness. You can also adjust ► To select OSD (On Screen Display) on/off when brightness in the picture settings. controlling remotely. Transmission Transmission (k)(h)( )([Set ID])( )(Data)(Cr) (k)(l)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 Data 00 : [Off]...
Page 43
14 Bass (Command: k s) (Depending upon model) (v)( )([Set ID])( )(OK/NG)(Data)(x) ► To adjust bass. You can also adjust Bass in the audio * It depends on model, and can adjust when sound settings. mode is EQ adjustable value. Transmission 18 Key (Command: m c) (k)(s)( )([Set ID])( )(Data)(Cr)
Page 44
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
Dolby Atmos, and the double-D symbol are available for download. trademarks of Dolby Laboratories. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Page 46
Regulatory FCC Radio Frequency Interference Requirements (for UNII devices) High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These FCC NOTICE radar stations can cause interference with and/or damage this device. This device cannot be co-located (For USA) with any other transmitter.
Page 47
WARNING! RSS-247 Requirement (For Canada) Never place a television set in an unstable location. A [For product having the wireless function using 5 GHz television set may fall, causing serious personal injury frequency bands] or death. Many injuries, particularly to children, can be (1) The device for operation in the band 5150–5250 avoided by taking simple precautions such as: MHz is only for indoor use to reduce the potential for...
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 52
LG Customer Information Center Supplier’s Declaration of Conformity For inquires or comments, visit www.lg.com or call; Trade Name Responsible Party LG Electronics USA, Inc. USA, Commercial User 1-888-865-3026 Address 111 Sylvan Avenue, North Building, 1-855-286-2456 CANADA Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 55
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 56
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
Page 57
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
Page 58
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 59
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 60
EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
Page 61
EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
Page 62
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
Page 63
11 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. 24. Input select (Command: x b) Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
Page 64
EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.