Replacing A Temperature Sensor For The Equipment Compartment - Huawei TP48200A-HT19C4-1 User Manual

Telecom power
Hide thumbs Also See for TP48200A-HT19C4-1:
Table of Contents

Advertisement

TP48200A-HT19C4-1 and TBC300A-TCA2 Telecom
Power
User Manual
Figure 4-25 Position of the battery temperature sensor
Step 4 Properly place the new battery temperature sensor and bind it securely with a cable tie.
Step 5 Reconnect the battery temperature sensor cable to the UIM.
Step 6 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
4.4.13 Replacing a Temperature Sensor for the Equipment
Compartment
Prerequisites
Procedure
Step 1 Connect the ground cable for the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Remove the temperature sensor cable for the equipment compartment from the UIM, as
shown in Figure 4-26.
Issue 03 (2019-11-15)
Prepare an ESD wrist strap, a pair of ESD gloves, an ESD box or bag, the cabinet door
key, and a maintenance tool kit.
Check that the new temperature sensor is intact.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tbc300a-tca2

Table of Contents