Table of Contents
Advertisement
Connection Examples –
External Devices
CAUTION
Before connecting the Electone to other electronic
components, turn off the power to all the components.
Before turning the power of the components on or off, set all
volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.
Using headphones
To use headphones, connect them to one of the PHONES
jacks (standard 1/4" phone jacks).
PHONES
Playing the sounds of the Electone
through an external audio system
By using the OUTPUT jacks, you can connect your
Electone to external powered speakers. If you're
connecting the Electone to a mono device, use only the
OUTPUT L/L+R jack.
Speaker (Left)
Speaker (Right)
AUX OUT L/L+R
R
NOTE
• When sounding the Electone from the speakers using the
OUTPUT jacks, connecting a set of headphones automatically
disables the sound from the speakers.
• Speakers are not included with the ELCU-M02. Please use
commercially available powered speakers.
Connection Examples – External Devices
Using a mixer for live performance
Generally, when you use this Electone on stage (in
concert, etc.), you should connect it to a mixer. By using a
mixer, you can easily adjust the volume and tone quality
of each component.
To connect to a mixer, use the AUX OUT jacks of the
Electone. The Electone features two types of AUX OUT
jacks: MAIN and SUB, allowing you to assign some parts
of the Electone's output to the SUB jacks and the other
parts to the MAIN jacks. In this way, you can apply
effects to the specific parts or adjust the volume balance
among the parts with an external mixer. For details, see
"Selecting Outputs for Each Part" on page 184.
AUX OUT of this Electone is a a terminal of LEVEL
FIXED terminal which outputs on a fixed level.
(ex. Powered-amp Speakers)
Monitor
Speakers
Sound
Sound
Other keyboard
MIC.
Sound
AUX OUT
AUX OUT
(MAIN)
(SUB)
L/L+R
R
1
The OUTPUT terminal can be used for connection the
Electone with a mixer.
The OUTPUT terminal can be adjusted the output level
by using the MASTER VOLUME dial.
Jacks
Output Type
AUX OUT MAIN jacks
Unbalanced*
L/L+R, R
LEVEL FIXED
AUX OUT SUB jacks
Unbalanced
1, 2
LEVEL FIXED
OUTPUT jacks
Unbalanced
L/L+R, R
LEVEL FIXED
*The Unbalanced line is intended for line-level signals.
ELC-02/ELCU-M02 Owner's Manual
Main Speakers
Sound
Sound
External
effect
device
Other
Mixer
Parts
Some
Parts
2
13
183
Advertisement
Table of Contents
