Table of Contents
Advertisement
Available languages
Available languages
WASH
The washer will fill to the correct water level based
on the load size and the Water Level selection.
Certain cycles may agitate during the fill process
to boost cleaning. You will hear the agitator rotate
followed by a pause lasting several seconds. When
the wash cycle begins, you will hear the agitator
increase speed. The motor sounds may change at
different stages in the wash cycle while the washer
performs different wash actions.
RINSE
Certain cycles use a spray rinse, which adds water to the
tub while the basket spins. When a fabric softener option
is selected, you will hear sounds similar to the wash cycle
as the washer rinses and moves the load. You may hear
the motor turning on briefly (short hum) to move the basket
while filling.
SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
The Lid Locked feature allows for higher
spin speeds. When the Lid Locked light is
lit, the lid is locked and cannot be opened
without pausing the cycle. When the
light is off, the lid can be opened.
To open the lid after it has been locked,
press START/PAUSE/Unlock Lid. The lid
will unlock once the washer movement
has stopped. This may take several
minutes if the load was spinning at high
speed. Press START/PAUSE/Unlock Lid
again to resume the cycle.
5
Hide quick links:
Advertisement
Chapters
Table of Contents
