Table of Contents
Advertisement
Installing the system board
1.
Hold the system board by its edges and angle it toward the back of the computer.
2.
Lower the system board into the computer until the connectors at the back of the system board align with the slots on the
back wall of the computer, and the screw holes on the system board align with the standoffs on the computer.
3.
Tighten the screws to secure the system board to the computer.
4.
Route all the cables through the routing channels and connect all the cables to the connectors on the system board.
5.
Install the:
•
memory module
•
PCIe expansion card
•
processor
•
heat sink assembly
6.
Close the front bezel door.
7.
Install the:
•
bezel
•
cover
8.
Follow the procedure in
After Working Inside Your
Computer.
15
Advertisement
Table of Contents
