Table of Contents
Advertisement
32
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
VGA OUT
devices.
(Standby)
Selecting "On" enables the function. Both micro USB cable
inside the projector and the DC 5V out port/USB A port (if
available) on the back of the projector can output 5V power
DC 5V Out
when it is in standby mode.
(Standby)
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI/MHL port of the projector.
HDMI CEC
(Internal)
Press
Reset
parameters on all menus to the factory default settings.
Enabling this function slightly increases the standby
power consumption.
Enabling this function slightly increases the standby
power consumption.
This function is only available for the internal HDMI/
MHL port.
after choosing "Yes" to return the display
Advertisement
Table of Contents
