Advertisement
Quick Links
Model:
MDX-40/400
Subject:
Preventing Mechanism Damage During Shipping.
Symptom:
(**)
The mechanism flex cables and/or KA2 gear may be damaged during shipping if the
mechanism is not properly locked.
Solution:
1- Install the customer's magazine into the mechanism.
2- Apply power to the system.
3- Press preset button "4", then press preset button "5", then press preset button "1"
and keep it pressed until all the segments of the display are illuminated (On the
MDX-400 the preset buttons and display are found on the in-dash portion of the
system. On the MDX-40, the preset buttons and display are found on a Unilink
equipped head unit to which the MDX-40 must be connected).
4- The mechanism will rotate to the disc number 3 position, at which point it will
move to the disc-chucked position.
5- Remove the Unilink cable from the mechansim (be careful not to press any
buttons, including the OFF button, before removing the Unilink cable to prevent the
mechanism from accidentally moving from the locked position).
Reference: Technical News ME-95004 (Revised)
Autoflagged - YES
Car Stereo
Service Bulletin
Sony Service Company - Technical Services
A Division of Sony Electronics Inc.
Sony Drive, Park Ridge, New Jersey 07656
PRINTED ON RECYCLED PAPER
359
No.
Date:
May 1, 1995
CSA-14
PRINTED IN USA
Advertisement
Related Manuals for Sony MDX-40
Summary of Contents for Sony MDX-40
- Page 1 (On the MDX-400 the preset buttons and display are found on the in-dash portion of the system. On the MDX-40, the preset buttons and display are found on a Unilink equipped head unit to which the MDX-40 must be connected).
- Page 2 Filename: CAR0359.SB Directory: J:\SBDOC\MAY95 Template: C:\WINWORD\S_BULL.DOT Title: Subject: Author: Hoyt Wing Lee Keywords: Comments: Creation Date: 05/01/95 11:00 AM Revision Number: Last Saved On: 05/01/95 11:00 AM Last Saved By: Hoyt Wing Lee Total Editing Time: 0 Minutes Last Printed On: 04/01/96 9:41 AM As of Last Complete Printing Number of Pages:...