Table of Contents
Advertisement
Setting items
Cinema Black Pro
Laser Light Setting
Contrast Enhancer
[CONTRAST ENHANCER]
Motionflow [MOTIONFLOW]
Contrast
[CONTRAST]
Brightness
[BRIGHTNESS]
Color
Hue
Color Temp.
[COLOR TEMP]
Sharpness
[SHARPNESS]
Description
Dynamic Control: Adjusts the range of movement of the laser light control.
Full: Automatically optimizes the laser light control and signal processing according to the brightness
level of the input source. This results in a bright and high contrast image.
Limited: Suppresses the movement and brightness of the laser light control, making the picture
quality suitable for viewing in a dark room.
Off: The "Dynamic Control" function is not applied.
Output: The higher the setting, the brighter the picture. The lower the setting, the darker the picture.
Tip
Adjust "Output" according to the brightness of the picture.
Corrects the level of bright and dark parts automatically to optimize contrast according to a scene.
Increases image sharpness and makes image dynamic.
High/Middle/Low: You can adjust the contrast enhancer.
Off: The contrast enhancer function is not applied.
Impulse: Reproduces original picture quality. Provides cinema-like picture, which may flicker.
Combination: Reduces motion blur while maintaining brightness for high-speed picture content.
Smooth High: Provides smoother picture movement; especially effective for film-based content.
Smooth Low: Provides smoother picture movement for standard use.
True Cinema: Images, such as a movie created in 24 frames per second, are reproduced at the original
framerate.
Off: The "Motionflow" function is not applied.
Tips
• Select "Off" if the selected "Smooth High," "Smooth Low," "Impulse," "Combination," or "True
Cinema" results in a distorted picture.
• When selecting "Impulse," the picture becomes dark. Also, it may flicker.
• Depending on the picture content, you may not see the effect visually even if you have changed the
settings.
• Only "Off" or "Impulse" is available when a signal with a resolution of 4096 × 2160 is input.
Adjusts the contrast.
Higher values increase the sharpness in images, while lower values decrease the sharpness.
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the darker the picture.
Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the lower the intensity.
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower the setting, the more reddish
the picture becomes.
Adjusts the color temperature.
D93: Equivalent to 9,300 K color temperature normally used in TVs. Gives white colors a blue tint.
D75: Equivalent to 7,500 K color temperature used as an ancillary standard illuminant. Gives a neutral
tint between "D93" and "D65."
D65: Equivalent to 6,500 K color temperature used as a standard illuminant. Gives white colors a red
tint.
DCI: DCI specification (page 40) color temperature.
D55: Equivalent to 5,500 K color temperature used as an ancillary standard illuminant. Gives white
colors an even redder tint.
Custom 1 to 5: Enables you to adjust, set, and store your favorite color temperature.
The factory default settings are as follows.
Custom 1: Same as the "D93" color temperature setting.
Custom 2: Same as the "D75" color temperature setting.
Custom 3: Same as the "D65" color temperature setting.
Custom 4: Same as the "DCI" color temperature setting.
Custom 5: Setting that prioritizes brightness.
Tip
You can adjust each item to a color temperature according to your preference.
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the softer the picture, thus reducing
the noise.
20
Advertisement
Table of Contents
