Camera System Setting [System Setup]; Synchronization Method Selection [Sync]; Privacy Zone Setting [Privacy Zone] - Panasonic WV-CP310/G Operating Instructions Manual
Color cctv camera
Hide thumbs
Also See for WV-CP310/G:
- Operating instructions manual (27 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Camera system setting [SYSTEM SETUP]
Performs the settings relating to the camera system such as synchronization, alarm input/out-
put terminal, and privacy zone.
The following settings can be configured on the "SYSTEM SETUP" screen displayed from the
top screen. Refer to page 5-6 for how to call up the screen.
"SYSTEM SETUP" screen
**SYSTEM SETUP**
SYNC
PRIVACY ZONE
STABILIZER
EL-ZOOM
UPSIDE-DOWN
LDC
RET TOP END
@ Synchronization method selection [SYNC]
Only INT method can be used.
VD2 synchronization cannot be used.
A Privacy zone setting [PRIVACY ZONE]
When undesired portions in the camera shooting area (on the screen) exist, those portions (pri-
vacy zone) can be set to be hidden. Up to 8 portions can be specified for the privacy zone.
ON (1): Grays the zone.
ON (2): Mosaics the zone.
OFF (default): Displays the zone normally.
Follow the procedure below to set the privacy zone.
Note:
• The privacy zone function is disabled at initializing the unit, i.e. right after turning on the power.
"SYSTEM SETUP" screen
**SYSTEM SETUP**
SYNC
PRIVACY ZONE
STABILIZER
EL-ZOOM
UPSIDE-DOWN
LDC
RET TOP END
Step 1
Move the cursor to "PRIVACY ZONE", select "ON (1)" or "ON (2)", and press the [SET ] button.
→ The "ZONE NUMBER" screen appears.
20
INT
OFF
OFF
OFF
OFF
I......
0
-
+
INT
ON(2)
OFF
OFF
OFF
I......0
-
+
"ZONE NUMBER" screen
** ZONE NUMBER 1 /8**
POSITION
PUSH SET
UPPER LEFT
ZONE LEVEL
..I.... 2
-
DEL
RET TOP END
+
Advertisement
Table of Contents
