Rj-11 Jack Cable - HP ProBook 4430s Maintenance And Service Manual
Hp probook notebook pc maintenance and service guide
Hide thumbs
Also See for ProBook 4430s:
- Maintenance and service manual (150 pages) ,
- Quickspecs (55 pages) ,
- Frequently asked questions manual (25 pages)
Table of Contents
Advertisement
RJ-11 jack cable
NOTE:
The RJ-11 jack cable is included in the Cable Kit, spare part number 646369-001.
Before removing the RJ-11 jack cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Bottom door (see
b.
Hard drive (see
c.
Optical drive (see
d.
WLAN module (see
e.
WWAN module (see
f.
Modem module (see
g.
Fan (see
h.
Heat sink (see
i.
Keyboard (see
j.
Top cover (see
Remove the RJ-11 jack cable:
1.
Position the computer right-side up with the front toward you.
2.
Remove the tape (1) that secures the cable to the computer.
3.
Remove the RJ-11 jack cable from the clips and routing channel (2) built into the base enclosure.
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
WLAN/Bluetooth combo card on page
WWAN module on page
Modem module on page
Fan on page
67)
Heat sink on page
Keyboard on page
Top cover on page
48).
50).
53)
51)
57)
81)
69)
64)
72)
Component replacement procedures
59)
87
- Quick Links:
- Memory Modules
Hide quick links:
Advertisement
Table of Contents
