Resetting The File Numbers - Epson PhotoPC L-500V Reference Manual

Epson photopc l-500v: reference guide

Hide thumbs Also See for PhotoPC L-500V:

Table of Contents

7. Copy the photos from the DCIM folder to your computer.

8. Turn off the camera and disconnect the cable.

Note:

If you copy PIF images to your computer, the link between the photos and the frames will be broken. PIF

frames can only be printed directly from the camera or directly from the memory card inserted into supported

Epson printers.

Resetting the File Numbers

Your camera automatically numbers photos in the order they were taken. When you replace or

reformat your memory card, you may want to reset the photo file numbers so any new photos

will begin numbering at 0001.

1. Turn the Mode dial to SETUP mode.

2. Move the joystick to l or r to move to Setup Menu 2. (Make sure the menu bar at the top of

the screen is highlighted.)

3. Move the joystick to u or d to select File No. Reset, then move it to r.

4. Move the joystick to u or d to select On, then press the OK button. The file numbers are reset.

Viewing and Managing Your Photos

Table of Contents