Epson Stylus Photo 825 Start Here
Epson stylus photo 825: quick start
Hide thumbs
Also See for Stylus Photo 825:
- Printer basics manual (120 pages) ,
- Product information (11 pages) ,
- Brochure & specs (2 pages)
Advertisement
Quick Links
EPSON Stylus
®
Start
Start
Here
Here
1
1
Unpack
Unpack
1
Remove everything from the box.
Ink cartridges
Paper support
Printer
CompactFlash
™
card adapter
Printer Basics
Roll paper
Roll paper
holders
adapter
Multi-card
adapter
2
Remove the tape and packing material.
3
Peel off the tape beneath the cover
and remove the insert.
2
2
Photo 825
1
Slide the paper support into its three slots on the
back of the printer.
2
Slide the roll paper adapter behind the paper support,
into the two slots on the back of the printer.
NOTE: For information on loading and
printing on roll paper, see your Printer
Basics book.
3
Insert the tabs on the roll paper holders into the slots
on the back of the printer.
3
3
Turn On the Printer
Turn On the Printer
1
Plug the printer's power cord into a grounded electrical outlet.
CPD-14525R1
4042683-00
2
Press the dark gray
button to turn on the printer.
Printer Software
CD-ROM
4
4
Quick Reference
card
book
1
Open the output tray.
2
Open the printer cover.
Peel off the
plastic film
3
Lift up both ink cartridge clamps.
Attach the
Attach the
Paper Holders
Paper Holders
power
Install Ink Cartridges
Install Ink Cartridges
4
Unpack the ink cartridges that came with your printer
and remove the yellow tape from the top.
5
Tilt each cartridge toward you as you lower
it into the holder.
Make sure the tabs rest on the hooks in the back.
6
Lower the clamps so they snap shut.
7
Press the
ink replacement button and
close the cover.
The green light flashes as your printer
charges ink for about 2
1
/
minutes.
2
CAUTION: Don't turn off the printer
or interrupt charging while the green
light is flashing or you'll waste ink.
5
5
Load Paper
Load Paper
1
Load some paper against the right side of the feeder
(up to the arrow inside the edge guide).
2
Press in the tab on the edge guide and slide it
to fit lightly against the paper stack.
3
Pull out the output tray extensions.
6
6
Connect the Printer
Connect the Printer
1
Make sure you have a USB cable (not included with your printer).
2
Plug the
square end of the USB cable into your printer's USB port.
3
Plug the
flat end of the cable into any available USB port on your computer.
Continue
CAUTION: Install both ink cartridges
and leave them installed for all types
of printing, or the printer won't work.
Turn over
Advertisement
Related Manuals for Epson Stylus Photo 825
Summary of Contents for Epson Stylus Photo 825
-
Page 1: Start Here
Pull out the output tray extensions. Connect the Printer Connect the Printer Make sure you have a USB cable (not included with your printer). Plug the square end of the USB cable into your printer’s USB port. Plug the flat end of the cable into any available USB port on your computer. -
Page 2: Install Software
When you’re finished installing software, close any open windows. Click Exit. When you see the registration screen, register your printer with EPSON as instructed. Remove the CD-ROM and keep it in case you need to reinstall any software later. You’re ready to print! See section 8.