Table of Contents
Advertisement
Safety precautions
These safety precautions are provided for your protection. Please read and follow them carefully to avoid personal
injury or damage to the product itself or other properties.
The following symbols differentiate the levels of danger and injury that may result if the product is not
used correctly as instructed.
WARNING
This manual uses a number of other symbols to indicate additional information.
(The symbols given below are examples.)
This symbol indicates an action that must not
be performed.
To prevent accidents such as fires and electric shocks
In case of any problem or failure
In case of any problem or failure,
stop using the product immediately
and disconnect the power plug.
(Otherwise, electric shock, fire or smoke may occur.)
<Example of problem / failure>
• Moving the power cord stops operation.
• Abnormal noise or vibration is observed
during operation.
• The product becomes abnormally hot or
burning smell is observed.
→ Immediately stop operation, disconnect the power
plug and contact an authorized service center (as
described in the warranty) for a check or repair.
Power plug
Do not touch the power plug with
wet hands.
(Electric shock may occur.)
Insert the power plug thoroughly.
(If the power plug is not inserted securely, electric
shock or fire due to overheating may occur.)
• Do not use damaged plugs or loosen wall sockets.
Be sure to stop operation when
disconnecting or connecting the
power plug.
(May cause the fire due to damages of the
socket or blade of the power plug.)
Periodically clean the power plug.
(If dust builds up on the power plug, it may
absorb moisture causing poor insulation, which
may result in fire.)
• Disconnect the power plug and wipe it with a
dry cloth.
20
This symbol indicates that
improper handling may cause
a risk of death or serious injury.
Always observe these precautions
CAUTION
This symbol indicates an action that must be
performed.
WARNING
Power cord or power plug
Do not do anything that may damage
the power cord or power plug.
• Power cord must not be damaged, modified, bent
excessively, twisted or pulled. Also do not put near heating
appliances, or put anything heavy on. Do not bundle.
(Short circuit may occur and cause electric
shock or fire.)
Please contact an authorized service center (as described
in the warranty) for a check or repair of the cord or plug.
Do not use overloaded wall
socket or wiring equipment, and
do not use a power supply other
than specification.
(If the wall socket is overloaded, fire due to
overheating may occur.)
Body
Do not disassemble or modify
this product.
(May cause injury, electric shock or fire due to
abnormal operation.)
Please contact an authorized service center
(as described in the warranty) for repair.
Do not insert any objects such as
pin, wire and metal ones into the
air inlet, outlet or any gaps.
(Touching the inner part of the product may
cause injury and electric shock.)
Do not insert any flammable
materials (such as straw, etc.)
into the air outlet of nozzle.
(May cause a fire due to overheating.)
Do not block the
air inlet or outlet.
(May cause a fire due to
overheating.)
Do not let the product get wet.
(Otherwise a fire and electric
shock may be caused due to
short circuit.)
This symbol indicates that
improper handling may cause a
risk of injury or damage to the
product or to your properties.
Air inlet
- Quick Links:
- Parts Identification
Hide quick links:
Advertisement
Chapters
Table of Contents
