Auxiliary Function
Connect an auxiliary device such as a TV or VCR via
the rear mounted AUX connector and press AUX
[Refer to the example image(1) shown below].
When you connect each end of the bundled portable
in cable with both the AUX connector and the
headphone jack of a portable device (like MP3 player,
cassette tape player, CD player, etc.), you can hear
the sound of the device through the speakers [Refer
to the example image(2) shown below].
Example (1)
To AUDIO in
Auxiliary Device
To AUDIO out
Portable Device
Note:
Turn the unit off and then connect an auxiliary device
before you connect an auxiliary device.
Because it may be made a noise.
Headphone Jack
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
8
Using Microphone
You can sing to a music source by connecting a
microphone to the unit.
1. Connect your microphone to the MIC1/ MIC 2
2. Play a music you want.
3. Sing along with the accompaniment.
Note:
• When not using the microphone, set the MIC VOL.
• If the microphone is set too near the speaker, a
• If sound through the microphone is extremely loud,
To Adjust ECHO Volume
You can give an echo effect to the sound from the
Example (2)
microphones.
Press ECHO VOL. (
increase the echo volume or decrease it.
(MIN,1 - 14, MAX steps)
Portable in cable
Jacks.
"
" will be shown in the display window.
Adjust the microphone volume by pressing MIC
VOL. button. (MIN,1 - 14, MAX steps)
to minimum or turn off the MICs and remove the
microphone from the MIC Jacks.
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using MIC VOL..
it may be distorted. In this case, decrease MIC
volume.
/
) on the remote control to