/reset
1...3 s
Note!
On the info level, you can press
In place of the
Note!
You can press
P
Smart Infrastructure
13.6
Info level
13.6.1
Display of info level
The info level displays information about the LME7 and operation in general.
button, you can also press
ESC
or
V
h min s
%
Parameter
Parameter value
Figure 21: Info level
No.
Parameter
Info level
102
Identification date
103
Identification number
113
Burner identification
123
Minimum output control step
140
Mode display for the 7-segment display
1 = standard (program phase)
2 = flame 1 (QRA / ION)
3 = flame 2 (QRB / QRC) not used
4 = active power (power value)
164
Number of startups resettable
166
Total number of startups
170.00
Switching cycles relay K12
170.01
Switching cycles relay K11
170.02
Switching cycles relay K2
170.03
Switching cycles relay K1
171
Signaling of "Switching cycle exceeded" for one of
the relay contact counters (parameters 170.00 to
170.03) → not active
End
Basic Documentation LME7...
13 Operation via AZL2
Press
/reset
When releasing
or
to display the next or the previous parameter.
for <1 second.
/reset
for >8 seconds to return to the normal display.
/reset
Note!
No change of value on the info level.
If the display shows
the value may consist of more than 5 digits.
When pressing
value will be displayed.
By pressing
/reset
return to the selection of the parameter no. (parameter
number blinks).
until InFo appears.
, you are on the info level.
/reset
. _ . _
together with the parameter,
for >1 second and <3 seconds, the
/reset
ESC
for >3 seconds or
, you
70/116
CC1P7105en
24.07.2020