Cleaning The Ventilation Gaps; Cleaning The Door Seal; Cleaning The Compressor And Metal Grille At The Back Of The Wine Appliance; After Cleaning - Miele KWT 6833 SG Operating And Installation Instructions

Wine conditioning unit
Hide thumbs Also See for KWT 6833 SG:
Table of Contents

Advertisement

Cleaning and care

Cleaning the ventilation gaps

A build-up of dust will increase the
energy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).

Cleaning the door seal

Risk of damage as a result of
incorrect cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
 The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
40
Cleaning the compressor and
metal grille at the back of the
wine appliance
A build-up of dust will increase the
energy consumption of the appliance.
Risk of damage as a result of
incorrect cleaning.
Cables and other components can
get broken off, bent or damaged.
Carefully clean the compressor and
metal grille.
The compressor and metal grille at the
back of the wine appliance (heat
exchanger) should be dusted at least
once a year.

After cleaning

 Replace all shelves and accessories
in the wine conditioning unit.
 Reconnect to the mains and switch
the wine conditioning unit back on.
 Place the wine bottles back in the
wine conditioning unit and close the
appliance door.

Advertisement

Table of Contents
loading

This manual is also suitable for:

10 486 070

Table of Contents