Table of Contents
Advertisement
Troubleshooting
Problem
• Sparks are generated inside the nanoe™ Outlet.
• The nanoe™ Outlet emits a noise
(crackling noise).
When the temperature is set to [230], [200],
or [180] it blinks alternately between 230 °C,
200 °C, or 180 °C and 170 °C.
All temperature setting lamps keep blinking.
It takes time to reach operating temperature.
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Specifi cations
100 - 120 V
Power source
50 - 60 Hz
Power consumption
The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a
representative period.
This product is intended for household use only.
14
Possible cause
Dust, styling products, etc. are adhered
to the pin-shaped portion where
nanoe™ is generated.
It is on standby mode.
The time to reach operating temperature
(approximately 100 °C) differs depending
on the area.
220 - 240 V
50 - 60 Hz
50 W
Action
Clean the nanoe™ Outlet to
remove any adherents.
When resuming use, press
the [+] or [-] temperature
setting switches and return
the temperature setting to
230 °C, 200 °C, or 180 °C.
Please request an inspection or
repair from place of purchase.
Advertisement
Chapters
Table of Contents
