Error Indications
If any of the following error indication appears, please inspect the cause and resolve the problem.
If the following errors are solved, the appliance will automatically continue to heat up.
(See EN18 "Troubleshooting")
Error code
Notes
If the problems above cannot be resolved or
●
power and unplug the power plug immediately.
Contact the authorised dealer or the Panasonic Service Center for details of the last 2 digits
➜
of " ".
Cause and solution
Crystal temperature sensor failure and overheating
protection
The air intake or the air exit is blocked by and
●
so forth, causing the insufficient rotation speed
of the fan. The heating power automatically
decreases when the heat level is not regulated.
Clean any blockage.
➜
Small object detection
When the bottom diameter of the pot is less
●
than 12 cm or no pot is placed.
Please place a suitable pot.
➜
Switch abnormality detection
When the operating key is covered by foreign
●
objects or stains for a long time.
Remove foreign objects or stains covering the
➜
operating key.
errors are shown, please turn off the main
EN17