Table of Contents
Advertisement
Steps
1. Align the solid-state drive with the socket on the system board and slide it in.
2. Replace the screw (M2x3) that secures the solid-state drive to the system board.
3. Route the SATA cables through the cable management tab.
4. Secure the metal bracket to the chassis by installing the two (6x32) screws.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5/2.5-inch hard-drive
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
28
Removing and installing components
bracket.
assembly.
After working inside your
computer.
Advertisement
Table of Contents
