Table of Contents
Advertisement
Bosch Motorsport
5.
Click 'Next'.
6.
Define the settings for the sensor.
7.
Click 'Finish' when done.
8.
Enter the channel name and description.
9.
Click 'OK' when done.
The channel is inserted into the C 80 Project Tree.
Channel is linked
to REV01
Input pin
Number of
has hall
teeth
interface
Manual_C_80
Analog and Frequency Inputs | 12
Number of teeth on the
pulse wheel
Circumference of wheel
for speed calculation
Choose data type of the
measurement variable
Enter name to automatically
create a new measurement sheet
Wheel
circumference
69 / 144
Advertisement
Table of Contents
