Table of Contents
Advertisement
Quick Links
Model No.
WV-S1531LN / WV-S1511LN
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to
operate the camera, refer to the Operating Instructions on the provided
CD-ROM.
* WV-S1531LNPJ is the same model as the Network Camera WV-S1531LN.
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Important Information
WV-S1531LN
Before attempting to connect or operate this product,
Network Camera
WV-S1531LTN
WV-S1531LNPJ
WV-S1531LNS
(Heavy salt damage resistance)
N
L
1
3
5
1
- S
V
W
Advertisement
Table of Contents
Related Manuals for Panasonic WV-S1531LTN
Summary of Contents for Panasonic WV-S1531LTN
- Page 1 Important Information Network Camera WV-S1531LTN Model No. WV-S1531LN / WV-S1511LN WV-S1531LNPJ WV-S1531LNS (Heavy salt damage resistance) WV-S1531LN * For information about the installation tasks, refer to the provided Installation Guide. For information about how to perform the settings and how to operate the camera, refer to the Operating Instructions on the provided CD-ROM.
-
Page 2: Table Of Contents
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 Preface ............................4 About notations ..........................4 Main functions ..........................4 About the user manuals ........................ 6 System requirements for a PC ...................... 6 Trademarks and registered trademarks..................7 Copyright ............................ -
Page 3: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Preface
This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Facial Coding, reduces data load compared to our previous models. Panasonic's own intelligent auto (iA) feature provides increased discernibility even in environments with poor visibility... - Page 5 *2 For further information about Extension Software refer to our website (https://security.panasonic.com/support/info/). *3 The rain wash coating is only effective against water (rain water) and is not effective against other substances such as oil or damage to the front cover.
-
Page 6: About The User Manuals
About the user manuals Product documentation is composed of the following documents. • Important Information (this document): Provides basic information about the product. • Installation Guide: Explains installation, mounting, cable connections, and adjusting the field of view. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. -
Page 7: Trademarks And Registered Trademarks
IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at https://security.panasonic.com/support/info/. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. -
Page 8: Open Source Software
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code. -
Page 9: Precautions
Precautions Do not insert any foreign objects. Do not attempt to disassemble or modify Fire or electrical shock may be caused if water this product. or any foreign objects, such as metal objects, Failure to observe this may cause fire or electric enter inside the unit. - Page 10 The screws and bolts must be tightened to [Precautions for use] the specified torque. When the product is accessible from the Failure to observe this may cause a drop Internet resulting in injury or accidents. To prevent unauthorized access, note the fol- lowing.
- Page 11 About the automatic status detection What to do if “WARMING UP-PLEASE function WAIT” appears on the display. When this product malfunctions due to exoge- This message indicates that the temperature nous noise, etc. for 30 seconds or more, the inside the camera has become extremely low. product will automatically reset and will return The camera will be automatically restarted to normal state.
- Page 12 Cleaning of the front cover Equipment classification and power When cleaning the front cover, hose or spray source indication label fresh water that is not containing lubricant Refer to the indication label on the bottom side agent or silicon substances and wash away of this unit for the equipment classification, adherents such as grain of sand.If dirt is power source, and other information.
-
Page 13: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide. In order to prevent injury, the product... - Page 14 Sulfurization caused by rubber products • Effects of snowfall During snowfall, there may be snow on the Do not place the product near rubber products front cover due to wind, which makes sur- (packing, rubber feet, etc.) that contain sulfur. veillance images difficult to see (varies There is a risk that sulfur components in rubber depending on the amount and quality of...
- Page 15 PoE (Power over Ethernet) Use a PoE hub/device that is compliant with IEEE802.3af standard. Router When connecting this product to the Internet, use a broadband router with the port forward- ing function (NAT, IP masquerade). Refer to the Operating Instructions on the pro- vided CD-ROM for further information about the port forwarding function.
-
Page 16: Parts And Functions
MONITOR OUT jack (Video Out terminal website* Default:For NTSC monitor) *1 Depending on the scanning application used, the Data Matrix may not be able to be read correctly. In this case, access the site by directly entering the following URL. https://security.panasonic.com/support/qr_sp_select/... - Page 17 ■ Cables cable (category 5e Ethernet or better, straight) RJ45 (female) Network cable 4P alarm cable Alarm input/output cable (accessory) 12 V DC power 2P power 12 V DC (red) supply terminal cable GND (black) (accessory) Audio input cable (white) Audio output cable (black) MONITOR OUT terminal (factory shipment: NTSC monitor)
- Page 18 12 V DC power supply terminal / 2P power cable (accessory) Caution: A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC POWER SUPPLY. ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
- Page 19 Alarm input/output cable / 4P alarm cable (accessory) Note: Off, input, and output of the external I/O terminal 2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions on the provided CD-ROM for further information about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output"...
- Page 20 When connecting to a network using a PoE hub Before starting the installation, check the entire system configuration. The following illustration gives a wiring example of how to connect the camera to the network via a PoE device (hub). Powered speaker Adjustment monitor PoE device (hub) Ethernet cable...
- Page 21 ■ Indicators and buttons S1511 S1531 SD ON/OFF button SD memory card slot (SD) LINK indicator ACT indicator SD ERROR/AF indicator SD MOUNT indicator TELE button WIDE button AF button INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) SD memory card warning/ error indicator INITIAL SET button (Initializing / NTSC ⇔...
- Page 22 LINK indicator When the camera is able to communicate with Lights orange the connected device ACT indicator When data is being sent via the network camera Blinks green (accessing) SD MOUNT indicator When an SD memory card is inserted and could Lights off →...
- Page 23 SD ON/OFF button ⑴ When the SD ON/OFF button is pressed (less than 1 second), the SD MOUNT indicator lights up in green and data can be saved to the SD memory card. ⑵ When the SD ON/OFF button is held down (about 2 seconds), the SD MOUNT indicator lights off and the SD memory card can be removed.
-
Page 24: Insert/Remove An Sd Memory Card
Insert / remove an SD memory card Note: Refer to the Operating Instructions on the provided CD-ROM for further information about the SD memory card settings. ■ Insert an SD memory card 【１】 Remove the front cover from the camera, insert an SD memory card fully into the SD memory card slot until a click is heard. -
Page 25: Troubleshooting
Use an SD memory card formatted on the camera. Or install the software to format the SD memory card on the PC. Refer to our website (https://security.panasonic.com/support/info/) for fur- ther information about the supported software. • Isn't the inserted SD memory card faulty? - Page 26 Reference Symptom Cause/solution pages • Check the following. • Grounding of the camera, a switching hub or peripheral devices are not done. • The camera is used near an electrical power line. • The camera is used near a device which produces Audio input contains strong magnetic field or radio waves (such as near noise.
-
Page 27: Specifications
337 mm {13-9/32 inches} (L) Mass: When directly mounting the camera to a ceiling or wall: WV-S1531LTN: Approx. 1.7 kg {3.75 lbs} WV-S1531LNS / WV-S1531LN / WV-S1511LN: Approx. 1.6 kg {3.53 lbs} When using the adapter box WV-S1531LTN: Approx. 2.2 kg {4.85 lbs} WV-S1531LNS / WV-S1531LN / WV-S1511LN: Approx. - Page 28 *1 Refer to our website (https://security.panasonic.com/support/info/) for further information about Power source and Power consumption information. *2 In the environment where IR LED is always turned on, make sure that the temperature is between –40° C and +50 °C {–40 °F to +122 °F}.
- Page 29 Video Motion Detection (VMD): On/ Off, 4 areas available Image rotation 0 °/ 90 °/ 180 °/ 270 ° Lens • WV-S1531LTN Zoom ratio: 2.3x Optical zoom 6.9x Extra optical zoom is available (when resolution is 640x360). (Motorized zoom / Motorized focus) WV-S1531LNS / WV-S1531LN / WV-S1511LN 3.6x Optical zoom...
- Page 30 Digital (electronic) zoom: Choose from 3 levels of x1, x2, x4 WV-S1531LTN Focal length: 9.0 mm – 21 mm {11/32 inches – 13/16 inches} WV-S1531LNS / WV-S1531LN / WV-S1511LN 2.8 mm – 10 mm {1/8 inches – 13/32 inches} Maximum aperture ratio: WV-S1531LTN 1:1.7 (WIDE) –...
- Page 31 • Network Network: 10BASE-T/100BASE-TX, RJ45 connector Resolution* S1531 H.265/ H.264 2 mega pixel [16:9] (30 fps mode)/ JPEG (MJPEG) 2 mega pixel [16:9] (60 fps mode) 1920x1080, 1280x720, 640x360, 320x180 3 mega pixel [4:3] (30 fps mode) 2048x1536* , 1280x960, 800x600, VGA, 400x300, QVGA S1511 1.3 mega pixel [16:9] (30 fps mode)/ 1.3 mega pixel [16:9] (60 fps mode)
- Page 32 *6 Refer to our website (https://security.panasonic.com/support/info/) for latest information about the browser. *7 Refer to our website (https://security.panasonic.com/support/info/) for latest information about the compatible SD memory cards. *8 When repeatedly recording images on an SD memory card using the auto overwrite function, make sure to use an SD memory card with high reliability and durability.
- Page 33 For U.S. and Canada: For Europe and other countries: Panasonic Corporation of North America Panasonic Corporation Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com http://business.panasonic.com/ Panasonic Canada Inc. Panasonic Corporation Osaka, Japan 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 1-877-495-0580 Authorised Representative in EU: https://www.panasonic.com/ca/...