WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING • If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION •...
Page 4
If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station).
- If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock.
Page 6
• If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •...
Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •...
• Set the appropriate resolution and clock by referring to the User’s Guide. - Your vision can be impaired. • Use authorized detergent only when cleaning the product. (Do not use benzene, thinner, or alcohol.) - Product can be deformed. •...
ASSEMBLING AND PREPARING CAUTION • Always use genuine components to ensure safety and durability of the product. • The product warranty will not cover damage or injury caused by the use of unauthorised components. NOTE • The accessories provided with your product may vary depending on the model. •...
Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The images in this user manual may differ from the actual product and optional accessories. System Controller Power Supply Unit LCLG003*, LCLG005* LPLG001...
• You can connect one LED Display Module per LLLG003* terminal. • You can connect up to nine LED Display Modules per LLLG003*. - You can use the terminals. • You can connect up to three LED Controllers by connecting the daisy chain to the LCLG003* 1 terminal.
When connecting to LLLG003 (LAP020EL6B, LAP020EL6BP) / LLLG003-A (LAP020EL7B, LAP020EL7BP, LAP020EL7N, LAP020EL7NP) • You can connect up to two LED Display Modules per LLLG003* terminal by connecting the daisy chain. • You can connect up to 12 LED Display Modules per LLLG003*.
When connecting to LLLG003 (LAP025EL4D, LAP025EL4DP) / LLLG003-B (LAP025EL7B, LAP025EL7BP, LAP025EL7N, LAP025EL7NP) • You can connect up to three LED Display Modules per LLLG003* terminal by connecting the daisy chain. • You can connect up to 24 LED Display Modules per LLLG003*.
Specific Position to Connect Signal Cable CAUTION • When connecting the cable, rotate it more than five times to complete the connection. • Check the direction so that the Signal cable is not damaged. • Inserting the Signal cable with excessive force may damage the contact part.
TROUBLESHOOTING No image is displayed. Problem Solution Is the power cable connected to the • Check if the power cable is properly connected to the connector. product? Is the signal cable connected to the • Check if the signal cable is properly connected to the connector. product? Is the Ethernet cable connected to •...
Page 24
Check if the maximum number of connections has been exceeded. connected to each terminal? • When connecting to LLLG003 (LAP015EL6B, LAP015EL6BP) / LLLG003-A (LAP015EL7B, LAP015EL7BP, LAP015EL7N, LAP015EL7NP): Up to 1 • When connecting to LLLG003 (LAP020EL6B, LAP020EL6BP) / LLLG003-A (LAP020EL7B, LAP020EL7BP, LAP020EL7N, LAP020EL7NP): Up to 2 •...
PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. symbol means alternating current, and the symbol means direct current. Input/Output Ports Rated Voltage 48 V Power Power Consumption On Mode: 10 W (Max)
Page 27
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL Temporary noise is normal when powering ON or OFF this SERIAL device.