Table of Contents
Advertisement
Step 4 Confirm the Motherboard's BIOS Settings
Power on the motherboard and enter the BIOS. Using the following table, confirm that
your motherboard's BIOS settings are correct.
BIOS Section
Boot Options> Removable Devices
Boot Options> ATAPI CDROM
Advanced> PCIPnP> Configuration> Legacy USB Support
Save the BIOS settings and restart the computer.
Note:
Make sure that your motherboard BIOS supports Legacy USB devices, USB Boot or Boot
to USB.
Note:
On some motherboards and server boards, depress the <CTRL>, <ALT>, and <ESC>
keys simultaneously to enter the BIOS. On others use the <F2> keys. See your server's
documentation for more information on entering the BIOS setup.
Step 5 Install the Operating System and ARMC/2 Drivers
Step
Action
1
Install the operating system (if applicable) on the host system.
2
(Windows 2000/2003 only) When prompted for the AMI Virtual Floppy drivers, install the ARMC/2
card's AMI Virtual Floppy drivers located on the ARMC/2 CD in the INF folder.
3
(Windows 2000/2003 only) When prompted for the virtual CD-ROM drivers, install the Windows
default CD-ROM drivers.
Note:
Do not use the amivirtfl.inf when prompted to install the virtual CD-ROM drivers. The
Virtual CD-ROM device does not require any special drivers. You can select the default option
Microsoft Windows provides.
Setting
Virtual Floppy or USB Boot Device
Virtual CDROM or USB Boot
Device
Enable
Chapter Two : Installing Your ARMC/2 Card
Cont'd
11
Advertisement
Table of Contents
