Entering Bios Setup - Acer Aspire easyStore H340 Service Manual
Hide thumbs
Also See for Aspire easyStore H340:
- User manual (148 pages) ,
- Manuel d'utilisation (144 pages) ,
- Guía del usuario (144 pages)
Table of Contents
Advertisement
Entering BIOS setup
IMPORTANT:To enter the BIOS setup, you need a debug board.
1.
Turn off the computer and all attached devices.
2.
Remove the cover. See "Removing the System Cover" on page 27.
3.
Connect the debug board cable to the debug board connector on the mainboard.
4.
Locate the JP3 Debug/User mode jumper on the mainboard.
5.
Close the jumper to enable system for debug mode.
6.
Connect the power cable to the rear panel.
7.
Connect a USB keyboard to the debug board.
8.
Connect a monitor to the debug board.
9.
Restart the system.
10. Turn on the monitor.
11. During POST, press F2.
If you fail to press F2 before POST is completed, you will need to restart the server.
The Setup Main menu will be displayed showing the Setup's menu bar. Use the left and right arrow keys
to move between selections on the menu bar.
10
Chapter 2
Hide quick links:
Advertisement
Table of Contents
