Bosch POWER FOR ALL AL 1830 CV Original Instructions Manual page 12
Hide thumbs
Also See for POWER FOR ALL AL 1830 CV:
- Original instructions manual (143 pages) ,
- Instructions manual (99 pages) ,
- Manual (18 pages)
Table of Contents
Advertisement
Available languages
Available languages
12 | English
tery voltage must match the battery charging
voltage of the charger. Do not charge any non-re-
chargeable batteries. Otherwise there is a risk of fire
and explosion.
Do not expose the charger to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
Keep the charger clean. Dirt poses a risk of electric shock.
u
Always check the charger, cable and plug before use. Stop using the charger if
u
you discover any damage. Do not open the charger yourself, and have it repaired
only by a qualified specialist using only original replacement parts. Damaged
chargers, cables and plugs increase the risk of electric shock.
Do not operate the charger on an easily ignited surface (e.g. paper, textiles, etc.)
u
or in a flammable environment. There is a risk of fire due to the charger heating up
during operation.
Do not cover the ventilation slots of the charger. Otherwise, the charger may over-
u
heat and no long function properly.
Recharge only with the charger specified by the manufacturer. A charger that is
u
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
In case of damage and improper use of the battery, vapours may also be emitted.
u
Ensure the area is well-ventilated and seek medical attention should you experience
any adverse effects. The vapours may irritate the respiratory system.
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
u
If contact accidentally occurs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate
plug fitted in its place by an authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never
be inserted into a mains socket elsewhere.
1 609 92A 63H | (10.03.2021)
Bosch Power Tools
- Quick Links:
- English
Hide quick links:
Advertisement
Table of Contents
