Sony RDP-X500IP Reference Manual
Personal audio docking system
Hide thumbs
Also See for RDP-X500IP:
- Specifications (2 pages) ,
- Startup manual (2 pages) ,
- Reference manual (2 pages)
Advertisement
Quick Links
Personal Audio Docking System
©2011 Sony Corporation
Printed in China
RDP-X500iP
For USA customers only
NOTE
This equipment has been tested and found to
English
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
Owner's Record
installation. This equipment generates, uses and
The model number and the serial number are located on
can radiate radio frequency energy and, if not
the bottom.
installed and used in accordance with the
Record the serial number in the space provided below.
instructions, may cause harmful interference to
Refer to them whenever you call upon your Sony dealer
regarding this product.
radio communications. However, there is no
guarantee that interference will not occur in a
Model No. RDP-X500iP
particular installation. If this equipment does
Serial No. _ _______________________________
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
For customers in the USA
to try to correct the interference by one or more
Please register this product on line at
http://www.sony.com/productregistration
of the following measures:
Proper registration will enable us to send you
— Reorient or relocate the receiving antenna.
periodic mailings about new products, services,
— Increase the separation between the equipment
and other important announcements. Registering
and receiver.
your product will also allow us to contact you
in the unlikely event that the product needs
— Connect the equipment into an outlet on a circuit
adjustment or modification. Thank you.
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
WARNING
technician for help.
WARNING
Replace the battery for the remote commander
To reduce the risk of fire or electric
with a Sony CR2025 lithium battery only. Use
shock, do not expose this apparatus to
of another battery may present a risk of fire or
rain or moisture.
explosion.
To reduce the risk of fire, do not cover the
Battery may explode if mistreated. Do not
ventilation opening of the apparatus with
recharge, disassemble or dispose of in fire.
newspapers, tablecloths, curtains, etc.
Dispose of used battery promptly. Keep away
Do not place the naked flame sources such as
from children.
lighted candles on the apparatus.
Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
To reduce the risk of fire or electric shock, do not
immediately consult a doctor.
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or
the like.
As the main plug is used to disconnect the system
from the mains, connect the system to an easily
accessible AC outlet. Should you notice an
abnormality in the system, disconnect the main
plug from the AC outlet immediately.
The system is not disconnected from the mains as
long as it is connected to the AC outlet, even if the
system itself has been turned off.
The dating code and the nameplate are located on
the bottom exterior.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same type.
Indicator
4-287-198-15(1)
Reference Guide
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
For the customers in Canada
This Class B digital apparatus complies with
Canadian ICES-003.
For the state of California USA only
Perchlorate Material –special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate
Operations
Power source
Power management system
After playback of the iPod (or component
connected to AUDIO IN jack) has finished, if no
operation is performed for about 20 minutes, the
Reaction indicator
unit will automatically turn off.
To prepare a power source
Remote sensor
Connect the supplied AC adaptor to the DC IN
19.5V jack on the back of this unit firmly, and
plug it into a wall outlet.
Note on the AC adaptor
Use the supplied Sony AC adaptor only. The
polarity of the plugs of other manufacturers
may be different. Failure to use the supplied AC
adaptor may cause the unit to malfunction.
Docking Tray
To charge your iPod
Precautions
You can use the unit as a battery charger for your
iPod when the power is supplied by the AC
adaptor.
To disconnect the AC adaptor, pull it out by the
Charging begins when the iPod is connected to
plug, not the cord.
the unit. The charging status appears in the
Since a strong magnet is used for the speaker,
keep credit cards using magnetic coding or
display on iPod. For details, see the user's guide of
your iPod.
spring-wound watches, CRT-based TVs, or
projectors, etc., away from the unit to prevent
Note
possible damage from the magnet.
The iPod continues to be charged when
Do not leave the unit in a location near a heat
powered by the AC adaptor and turned on or
source such as a radiator or airduct, or in a
off.
place subject to direct sunlight, excessive dust,
To turn the unit on/off
mechanical vibration, or shock.
Allow adequate air circulation to prevent
Press / (power).
internal heat build-up. Do not place the unit on
The / indicator will light up when the unit is
a surface (a rug, a blanket, etc.) or near
turned on.
materials (a curtain) which might block the
To adjust the volume
ventilation holes.
Should any solid object or liquid fall into the
Press VOLUME +/−.
unit, unplug the unit and have it checked by
To select iPod or AUDIO IN as
qualified personnel before operating it any
further.
the source
Do not handle the unit with wet hands.
Press iPod or AUDIO IN.
Do not place the unit anywhere near water.
The iPod or AUDIO IN indicator will light up
Note on unit placement
when the button is pressed.
When playing the unit at loud volume, the unit
To play/pause the iPod
may move due to vibration, depending on
where the unit is placed.
Press .
Check that the unit is placed where it will not
fall down due to vibration.
The Reaction indicator flashes when the
NOTES ON LITHIUM BATTERY
command is received.
Wipe the battery with a dry cloth to assure a
good contact.
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Note
In the Reference Guide, "iPod" is used as a
general reference to functions on an iPod,
iPhone or iPad, unless otherwise specified by
the text or illustrations.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Remote commander
Before using the supplied remote commander for
the first time, remove the insulation film.
Aim the remote commander at the front of the
unit near the remote sensor .
The Reaction indicator flashes when the
remote commander's command is received.
VOL + and buttons have a tactile dot.
/ (Power)
Turn the unit on/off. The / indicator lights
up when the unit is turned on.
(Play/Pause)
Start playing iPod. Press again to pause/resume
playback.
Press and hold to turn off the iPod.
(Forward)
Go to the next track.
Press and hold while listening to the sound to
locate a desired point.
Press and hold in pause while observing the
display on iPod to locate a desired point.
(Backward)
Go back to the previous track. During
playback, this operation returns to the
beginning of the current track. To go back to
the previous track, press twice.
Press and hold while listening to the sound to
locate a desired point.
Press and hold in pause while observing the
display on iPod to locate a desired point.
(Up)/ (Down)
Select a menu item or track for playback.
iPod
Select iPod as source.
AUDIO IN
Select AUDIO IN as source.
MENU
Go back to the previous menu.
ENTER
Execute the selected menu item or begin
playback.
VOL +/− (Volume plus/minus)
Adjust the volume.
Note
The iPod nano (6th generation) cannot be
controlled by the remote when the command of
"MENU, " ", " ", " and "ENTER" is pressed.
When to replace the battery
With normal use, the battery (CR2025) should
last for about 6 months. When the remote
commander no longer operates the unit, replace
the battery with a new one.
the side facing up
Note
If you are not going to use the remote
commander for a long time, remove the battery
to avoid any damage that may be caused by
leakage and corrosion.
Advertisement
Related Manuals for Sony RDP-X500IP
Summary of Contents for Sony RDP-X500IP
- Page 1 4-287-198-15(1) Personal Audio Docking System Reference Guide ©2011 Sony Corporation Printed in China RDP-X500iP For USA customers only NOTE This equipment has been tested and found to English comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Owner’s Record installation. This equipment generates, uses and The model number and the serial number are located on can radiate radio frequency energy and, if not the bottom. installed and used in accordance with the Record the serial number in the space provided below. instructions, may cause harmful interference to Refer to them whenever you call upon your Sony dealer regarding this product. radio communications. However, there is no guarantee that interference will not occur in a Model No. RDP-X500iP particular installation. If this equipment does Serial No. _ _______________________________...
-
Page 2: Specifications
Docking Tray. Doing so may cause a from the Dock connector, and then press and malfunction. hold VOLUME − and simultaneously for When placing or removing the iPod, hold the more than 2 seconds. (The indicator for iPod Docking Tray securely. flashes rapidly when deactivated.) Before disconnecting the iPod, pause playback. To re-activate the App’s link function, repeat the If the battery of your iPod is extremely low, above steps. The indicator for iPod will flash charge it for a while before operation. slowly. Sony cannot accept responsibility in the event When you remove the iPod touch/iPhone/iPad that data recorded to an iPod is lost or damaged from the docking tray, the Sound EQ function when using an iPod connected to this unit. setting will return to the default. For details of environmental conditions for When the sound volume is high, the Sound EQ operating your iPod, check the website of Apple function may not be effective. Inc. To adjust the volume Press VOLUME +/− (VOL +/− on the remote commander).