60/83
Bosch Rexroth AG
Maintenance and Installation
8.3.2
Mounting the UPS
General Information
Fig.8-1:
Connecting the UPS
The UPS for 24 V can directly be engaged on the top-hat rail (refer to the project
planning manual of the UPS used). To mount the UPS for 230 V, a holder is
available as accessories. This holder can be engaged in a top-hat rail or can
be fastened to a rear panel with two M6 screws.
After mounting the holder, lift the angle bracket and insert the UPS. Now close
the angle bracket and fix it with the enclosed nut.
Fig.8-2:
View of the UPS inserted in the holder
DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC