Programming The Remote For Other Components - Sony RHT-G800 Operating Instructions Manual
Theatre stand system
Hide thumbs
Also See for RHT-G800:
- Service manual (60 pages) ,
- Operating instructions manual (48 pages) ,
- Control manual (8 pages)
Table of Contents
Advertisement
Available languages
Available languages
To cancel programming
Press the input button (TV, DVD/BD, SAT,
AUDIO) you pressed in step 1.
If programming is unsuccessful,
check the following:
• If the input button you pressed in step 1 does
not light up, the batteries are weak. Replace
both batteries.
• If you do not press the following button within
60 seconds during registration, the operation
will become invalid. Perform the process from
step1 again.
• An error has occurred when the input button
you pressed in step 1 flashes five times after
ENT has been pressed in step 3. Perform the
process from step 1 again.
30
US
Programming the remote
for other components
You can program the remote to control non-Sony
components by changing the code. Once the
control signals have been memorized, you can
use those components as part of your stand.
Furthermore, you can also program the remote
for Sony components that the remote is unable to
control. Note that the remote can only control
components that accept infrared wireless control
signals.
You cannot register any component other than a
TV into the TV button of the remote.
1
Press AV POWER while holding down
the input button (TV, DVD/BD, SAT,
AUDIO) for the component you want to
operate.
For example, if you are going to operate a
DVD player, press DVD/BD.
The input button you pressed flashes.
2
Check the manufacture code of the
component you want to operate and
press the number button.
AV POWER
Input buttons
(TV, DVD/BD,
SAT, AUDIO)
Number buttons
ENT
Hide quick links:
Advertisement
Chapters
Table of Contents
