Nokia Customer Care
Cell Transmitter Setup
Use the following steps to set up the phone for Tx troubleshooting in Phoenix.
1. Open the Phone Control dialog box.
2. Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
3. Select the following values on the RF Main Mode dialog box:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx/Tx
•
4. Click Set.
Note: Be sure that the "RF Main Mode set successfully..." message appears in the status bar.
Issue 1 07/2004
Figure 3: Phone Control dialog box for Tx troubleshooting
Figure 4: RF Main Mode dialog box for Tx troubleshooting
©2004 Nokia Corporation
Troubleshooting - RF
Company Confidential
2112 (RH-57)
Page 7