Download
Share
Print this page
Dell P2720DC Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Monitor
  5. P2720DC
  6. Service manual

Dell P2720DC Service Manual

Hide thumbs Also See for P2720DC:

Advertisement

Quick Links

Download this manual
27" LED Monitor
Dell P2720DC
Service
Service
Service
Simplified
1

Advertisement

loading

Related Manuals for Dell P2720DC

Summary of Contents for Dell P2720DC

  • Page 1 27" LED Monitor Dell P2720DC Service Service Service Simplified...

  • Page 2: Important Safety Notice

    Consequently, DELL has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by DELL must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.
  • Page 3 1. Exploded view diagram with list of items 2. Wiring connectivity diagram...

  • Page 4: Tools Required

    3. Tools Required List the type and size of the tools that would typically can be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description: − Screwdriver (Phillip head) #1 −...
  • Page 5 Wedge your fingers between the rear cover and the middle bezel on the corners of the top side of the monitor to release the rear cover, then use Scraper to separate the rear cover in the below 3direction of the arrow. Tear off the tape and cable to separate the rear cover.
  • Page 6 Disconnect all of the cables to separate the Tear out all the cable to remove the rear cover and power board and main board. put it on a protective cushion. Use a Philips-head screwdriver to remove 10 screws for unlocking the middle plastic bezel with the whole unit, and then remove the middle plastic bezel carefully.
  • Page 7 Use a Philips-head screwdriver to remove 3 screws for unlocking the bezel and the middle frame. (No.1~3 screw size=M2X2.5, Torque: 6± 1kgf.cm) Use a Philips-head screwdriver to remove 3 screws for unlocking the key board and the middle frame. (No.1~3 screw size=M2X2.5, Torque: 6± 1kgf.cm) The USB Board Use a Philips-head screwdriver to remove 1 screws to remove the USB board.
  • Page 8 3.2 Assembly Procedures Use a Philips-head screwdriver to lock 1 screws for assembling the USB board and Connect the cables of the USB board (No.1 screw size=M3x6, Torque=4± 1kgf.cm) Use a Philips-head screwdriver to lock 3 screws for assembling the key board and the middle frame. (No.1~3 screw size=M2X2.5, Torque: 6±...
  • Page 9 Connect all of the cables of the power board and main board.stick the mylar by hand and Use a Philips-head screwdriver to lock 9 screws for assembling he main board and the adapter board Connect all the cables and stick all the tapes on the rear cover and put it on a protective cushion. Use a Philips-head screwdriver to lock 10 screws for assembling the middle plastic bezel with the whole unit,.
  • Page 10 Use a Philips-head screwdriver to lock four screws for assembling the rear cover (No.1~4 screw size=M4x10; Torque: 12± 2kgf.cm) Assemble the stand...

  • Page 11: Troubleshooting Instructions

    4. Trouble shooting instructions...