D-Link Nuclias Connect Hub Plus DNH-200 User Manual page 64

Hide thumbs Also See for Nuclias Connect Hub Plus DNH-200:
Table of Contents

Advertisement

Nuclias Connect Hub Plus User Manual
You can also access this tab by clicking Edit for an existing VLAN configuration on the
VLAN List tab.
Note: An SSID can belong to only one Untagged VLAN member. When adding an SSID to
a VLAN's Untagged VLAN member, the SSID will be unmembered from another VLAN
assigned earlier.
PVID Settings
On the PVID Settings tab, you can view and configure the Port VLAN Identifier (PVID) settings
for port-based VLAN.
Use the following steps to configure the PVID:
Enable or disable PVID Auto Assign Status. To manually configure PVID for each SSID,
1.
disable this option.
2.
Input a VLAN ID for the listed interfaces and SSIDs.
Every untagged frame leaving from the configured port will be assigned a tag to identify its
membership.
IP Interface List
The Port List tab shows the VLAN ID with the IP settings. It shows the VLAN ID with the IP
assignment method and the IP address.
Add/Edit IP Interface
In the Add/Edit IP Interface tab, you can assign a VLAN ID (VID) with an IP interface. This is
useful when authenticating users for network access through a captive portal. You can
configure Captive Portal for each virtual wireless subnet. For other configuration parameters
of controlled network access, go to Configuration > Profile Settings > SSID and click User
Authentication.
Use the following procedure to configure an IP interface:
1.
Enter a VLAN ID (VID) that has been configured.
Select the IP assignment method from the Get IP Address From list. If Static IP Address
2.
is used, enter the IP Address and Subnet Mask of the IP interface. Then enter the
Gateway and DNS server addresses.
3.
Click Add to add this entry to the IP Interface List. The list also allows you to modify an
entry.
Once the settings are updated, the configuration must be uploaded to the access points. See
Profile Settings for more information.
Bandwidth Optimization
The Bandwidth Optimization page allows you to optimize available bandwidth. Navigate to
64
AP Network

Advertisement

Table of Contents
loading

Table of Contents