Installation; Mount The Subwoofer In Car; Connect Wires - Philips CSM1000 User Manual
Hide thumbs
Also See for CSM1000:
- User manual (14 pages) ,
- Specifications (2 pages) ,
- User manual (12 pages)
Table of Contents
Advertisement
3 Installation
Note
•
Follow all mounting and wiring instructions.
Mount the subwoofer in car
You can mount the subwoofer either under a
seat or on the rear tray.
Note
•
Make sure that the mounting location is safe
for drilling and wiring, and it will not interfere
with the mechanical and electrical components
of the vehicle.
•
For under-seat installation, make sure that it
does not obstruct seat mobility.
1
Place the subwoofer on the location for
installation.
2
Mark the positions of the four screw
holes.
3
Drill the holes with driller of
approximately 4mm in diameter.
4
Mount the subwoofer with the supplied
screws and brackets.
All manuals and user guides at all-guides.com
Connect wires
Caution
•
Ensure that all loose leads are insulated with
electrical tape.
1
Connect the subwoofer to your car audio
by:
•
(option 1) connect to bare speaker
wires from car audio.
•
(option 2) connect to the car audio
directly via an RCA cable.
EN
7
Advertisement
Table of Contents
