LG 65EV960H Commercial Mode Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. OLED TV
  5. 65EV960H
  6. Commercial mode setup manual

LG 65EV960H Commercial Mode Setup Manual

Lodging guest interactive pro: centric tvs
Hide thumbs Also See for 65EV960H:
Table of Contents

Advertisement

Quick Links

Download this manual
65EV960H
®
Lodging Guest Interactive Pro:Centric 
TVs
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 16 – 25
Custom Master TV Setup
pages 40 – 42
Cloning Procedures
pages 43 – 49
P/N: 206-4322 (Rev C)
© Copyright 2018 LG Electronics U.S.A., Inc.

Advertisement

Table of Contents
loading

Related Manuals for LG 65EV960H

Summary of Contents for LG 65EV960H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 16 – 25 Custom Master TV Setup pages 40 – 42 Cloning Procedures pages 43 – 49 P/N: 206-4322 (Rev C) © Copyright 2018 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its Follow all instructions. appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced Do not use this apparatus near water.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Table of Contents Safety Warnings ........2 Cloning Procedures .

  • Page 6: Commercial Mode Overview

    TV’s CPU or Protocol Translation Controller (PTC), or it resides in a Pro:Centric application or an external device from the solution provider. These TV models support several different operational modes: LG’s Free-To-Guest (FTG) Mode via the TV CPU, Application Tuning Mode (ATM) with Pro:Centric application, or Pass-through Mode (default). When in Pass-through Mode, these TV models can also be externally controlled via Multiple Protocol Interface (MPI) or TV-Link Monitor (TLM) interface (RS-232C).

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the PTC INSTALLER MENU commercial controller (PTC) Installer Menu and make changes to the xxEV960H default values as required. If necessary, familiarize yourself with the CPU - CTV Installer Menu and how to make and save changes.
  • Page 8 • TV Zoning (including channel restrictions by Zone) and Wi-Fi Zoning options for location-specific configuration. LG’s Cloud Configuration Tool enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. Configuration utilities enable you to create/edit an FTG Channel Map and configure Installer Menu settings.

  • Page 9: Application Tuning Mode / Pro:centric Direct

    While the TV is in Application Tuning Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • While it is possible to update a TV’s Installer Menu and/or Setup Menu settings locally using a USB memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made...
  • Page 10 Commercial Mode Overview (Cont.) ASPECT RATIO Aspect Ratio Function Menu TV Setup Menus Sound Out Indicates the TV is not in Shows that the TV is in Aspect Ratio 16:9 Pass-through Mode . While Pass-through Mode . Audio Mode Just Scan the TV is in this mode, Installer Menu settings can General...

  • Page 11: Pro:centric Operation

    Pro:Centric Operation These TV models support LG’s Pro:Centric Java application, as well as the Pro:Centric Direct HTML application. Only one application may be implemented at a time. The following sections provide an overview of the application features and functionality. Interactive Menu Features Both the Pro:Centric Java application and the Pro:Centric Direct HTML application enable guests to locate and select television entertainment, check the daily weather, view hotel and surrounding amenities, etc.,...
  • Page 12 Pro:Centric Operation (Cont.) Example: Pro:Centric Java Application Portal Example: Pro:Centric Direct HTML Application Portal 206-4322...

  • Page 13: Pro:centric Java Application Setup

    Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java application operates in conjunction with FTG and PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide.

  • Page 14: Pro:centric Direct Html Application Setup

    Pro:Centric Operation (Cont.) TV in FTG Mode If the TV is already in FTG Mode, use the Cloud Configuration Tool to update Installer Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu settings to the TV.
  • Page 15 Pro:Centric Operation (Cont.) • Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See “Accessing the IP Environment Menu” on page 56 and “Pro:Centric Setup” on pages 60 to 62 for further information.

  • Page 16: Ez-Manager Wizard

    EZ-Manager Wizard Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the EZ-Manager Wizard to appear. Note: The Installer Remote shipped with the EV960H TV models supports MMR operation, which is enabled by default.

  • Page 17: Initiate Configuration Or Exit The Ez-Manager Wizard

    EZ-Manager Wizard (Cont.) • If you would like to enable the DIAL and/or SoftAP Media Share features or select pre-loaded/ Smart Launcher applications on a TV that will eventually be configured for FTG Mode, you will need to use the IP Environment Menu to do so before the TV is configured for FTG Mode. Refer to “IP Environment Setup”...

  • Page 18: Tv Configuration Options

    EZ-Manager Wizard (Cont.) TV Configuration Options From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature(s) on the TV for location-specific configuration purposes, select the “Zones &...
  • Page 19 EZ-Manager Wizard (Cont.) EZ-Manager Wizard (Cont.) Note: Zoning features are only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). ZONES, LABEL, AND ROOM NUMBER Wi-Fi Zone If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi <...

  • Page 20: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “NEXT” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: Select the “BACK” button, where available, to check previous settings, as necessary. SEARCHING FOR PRO:CENTRIC SERVER... This step automatically searches for the Pro:Centric Server.
  • Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example, “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGUR...
  • Page 22 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then press the Wheel (OK) button. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.
  • Page 23 EZ-Manager Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel.

  • Page 24: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric Configuration screen example on page 21). When the Pro:Centric configuration is complete, an EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.
  • Page 25 EZ-Manager Wizard (Cont.) USB Configuration via EZ-Manager Wizard With either the TV Configuration Options or the Zones, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device. 1. Insert the USB memory device with the appropriate file(s) into either of the TV’s USB ports. 2.

  • Page 26: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files (one of each file type) at one time from the files loaded on a USB memory device. You may use this utility to download a TV CPU software update, a PTC software update, and/or a Clone or FTG Configuration (.tlx) file to a TV.
  • Page 27 Ez Download Utility (Cont.) (Continued from previous page) Note: In order for the proper TV Zone and/or Wi-Fi Zone profile data to be applied, the appropriate TV Zone # and/or Wi-Fi Zone # must be set in the Target TV BEFORE you continue with the Ez Download utility. 4.
  • Page 28 Ez Download Utility (Cont.) (Continued from previous page) 7. If it is not currently selected, use the arrow keys to select Ez Download, and then press the Wheel (OK) button. As illustrated on the previous page, when Ez Download is selected, a list of up to three files is displayed on the screen, one each of the TV Software (CPU) and PTC Software files stored in the LG_DTV folder and the Clone/Configuration (.tlx) files stored in the root directory on the USB device.
  • Page 29 Ez Download Utility (Cont.) (Continued from previous page) Update progress will be displayed on the screen. Do NOT remove the USB device while updates are in progress. When the Ez Download process is complete, an overview of the results will briefly be displayed and then, the TV will reboot. 11.

  • Page 30: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG Configuration (.tlx) file created using LG’s Cloud Configuration Tool. Refer to the table on pages 32 and 33 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.

  • Page 31: Navigating Within The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 32 Installer Menu (Cont.) Installer Menu Items 000 through 070 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 33 Installer Menu (Cont.) Installer Menu Items 071 through 122 Item Function Value Range Default Value Brief Description of Function BCK. CH-TIME 0 – 7 Chooses custom background color for MPI display characters. If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...

  • Page 34: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE 0 = Broadcast 1 = Cable (default) Specifies entry sequence to the Installer Menu. 2 = HRC 3 = IRC 0 = 9876 1 = 4321 Determine the RF band used by the RF distribution system, and 2 = 1478 3 = 3698 then select the appropriate value for this item before tuning...
  • Page 35 Installer Menu (Cont.) 015 - SLEEP TIMER NOTE: For items 007, 008, and 009 If set to 1, the Sleep Timer feature is enabled and available to the For legacy reasons, the scale used is 0 – 63. The PTC software end user.
  • Page 36 Disabled External Speaker (Optical/HDMI ARC) 035 - HDMI1 ENABLE Enabled LG Sound Sync (Optical) Set to 1 to enable HDMI 1 input in DTV Mode. Set to 2 to enable Disabled LG Sound Sync (Optical) HDMI 1 input in PC Mode. Set to 0 to disable display panel HDMI 1 input.
  • Page 37 Installer Menu (Cont.) 070 - FOR. CH-TIME (Display Characters Foreground Color) 083 - HANDSHK TIME (Handshake Time) Set the foreground color for MPI display characters according to Adds an additional delay to the handshake time which is 64 msec, the following color chart: thus relaxing MPI timing requirements to be compatible with PC- based Windows controlled systems.
  • Page 38 Fixed 1.00 Watt (default) If set to 0 (default), the TV’s MMR (Magic Motion Remote) feature is enabled, and a compatible LG MMR may be used with the TV. If Control with volume set to 2, the MMR feature is disabled.
  • Page 39 Installer Menu (Cont.) 116 - VIDEO MUTE EN (Video Mute Enable) Directly entering 128 resets the default value (OFF) for this item, Applicable for analog channels only. If set to 1, video mutes though note that this setting does not mean the TV will not initiate (blank screen) when no signal is present.

  • Page 40: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode.

  • Page 41: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2.
  • Page 42 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press the PICTURE button on the Installer Remote, and select the All Settings menu Picture icon from the Quick Settings Menu to access the advanced TV setup menus.

  • Page 43: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 44 Cloning Procedures (Cont.) (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also, note that Diagnostics is for service use only. TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below.

  • Page 45: Importing A Clone File

    Cloning Procedures (Cont.) (Continued from previous page) TV MANAGER Export Clone File USB DEVICE USB 1: Device Name Ez Download Select the filename, and then select EXPORT below. Update TV Software Update PTC Software xxEV960H-UA_1.TLX Import Clone File Export Clone File Diagnostics EXPORT Export progress will be displayed on the screen.
  • Page 46 Cloning Procedures (Cont.) (Continued from previous page) • If the EZ-Manager Wizard appears on the screen when you turn ON the Target TV, you can use the wizard’s “USB Configuration” option to access the TV Manager and complete the import procedure (see “TV Configuration Options”...
  • Page 47 Cloning Procedures (Cont.) (Continued from previous page) 2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, you can complete the import procedure via the wizard, as indicated above (see “Before You Begin”).
  • Page 48 Cloning Procedures (Cont.) (Continued from previous page) 8. If more than one USB memory device is currently connected to the TV, be sure to select the USB device that contains the “.tlx” file you wish to use. If necessary, use the arrow keys on the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the screen and press the Wheel (OK) button.
  • Page 49 Cloning Procedures (Cont.) (Continued from previous page) 12. When you are ready to continue, select UPDATE on the screen and then press the Wheel (OK) button on the Installer Remote. Import progress will be displayed on the screen. This process may take a few minutes. Do NOT remove the USB device while importing is in progress.

  • Page 50: Cloud Configuration Tool Overview

    Cloud Configuration Tool Overview This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG Mode configuration. For best results, it is recommended that you access the Cloud Configuration Tool ® using one of the following web browsers: Google Chrome™ 51 or later or Mozilla Firefox ...
  • Page 51 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) • If you are creating an FTG Configuration file from scratch and this is your first time using the Cloud Configuration Tool, you may wish to select the Wizard Setup, which will guide you through the essential steps of creating the file—building the Channel Map and/or the Installer Menu profile(s).
  • Page 52 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) 3. If you need to edit the FTG Channel Map from an existing file (see previous step) or create a new FTG Channel Map, click on CHANNEL MAP in the menu options bar at the top left of the page to access the Channel Map web page (see example on page 54), and edit/create the FTG Channel Map.

  • Page 53: File Manager Web Page Overview

    Cloud Configuration Tool Overview (Cont.) File Manager Web Page Overview The File Manager page (displayed after you select ADVANCED SETUP from the Welcome page) enables you to compile, modify, and save (export) FTG Configuration (.tlx) files. The following example provides an overview reference of the functions available on the File Manager page. Data contained in uploaded FTG Data to be saved in the FTG Configuration (.tlx) file.

  • Page 54: Channel Map Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Channel Map Web Page Overview On the Channel Map page, you can create, view, and edit a Logical Channel Map. Click the appropriate button to Search for existing channels or add a new RF or IP channel to clear the FTG Channel Map.

  • Page 55: Installer Menu Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Installer Menu Web Page Overview Load default Installer Menu for selected model. Assign Zone as applicable. Once you click on CREATE (Advanced Setup only) Cloud PROFILE, this Installer Menu profile will be listed under Configuration Tool menu bar the Installer Menu Profile List, and Installer Menu items provides access to all utilities.

  • Page 56: Ip Environment Setup

    Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 40 to 42), all IP Environment settings, with the exception of Wired Network Connection settings, LG Connect settings, the TV name (editable in the Media Share Menu), DIAL settings, and SoftAP settings, may be cloned.
  • Page 57 IP Environment Setup (Cont.) Configuring a Wired Network Connection Note: If desired, you can configure both wired and wireless NETWORK SETT... connections. However, note that a wired connection is always prioritized over a wireless connection. That is, when the TV is turned Network Network / OFF and then back ON, if a Local Area Network (LAN) is detected...
  • Page 58 IP Environment Setup (Cont.) (Continued from previous page) If the network is connected successfully, a “Connected to Internet” message will appear just below the progress display. If the network connection is not successful, the progress display will identify the network element in which the connection failed. Check your cabling and/or verify the configuration data, as necessary.
  • Page 59 TV with a mobile device, which can then be used to access and control TV features (i.e., the device may be used as a mobile remote). LG Connect requires that both the TV and the mobile device be on the same Wi-Fi network.

  • Page 60: Pro:centric Setup

    IP Environment Setup (Cont.) (Continued from previous page) If you are modifying the IGMP version, use the Up/Down arrow keys to select the appropriate version number from the drop-down list of options, and then, press the Wheel (OK) button. 4. Once all modifications are completed as required, use the arrow keys on the Installer Remote to return to the IP Environment Menu, as necessary, or press BACK/EXIT to return to the Network Menu and/ or exit the IP Environment Menu.
  • Page 61 IP Environment Setup (Cont.) (Continued from previous page) 3. Refer to the appropriate subsection(s) below to configure the TV’s Pro:Centric settings to match those of the Pro:Centric server. PRO:CENTRIC While the Pro:Centric application itself is an additional feature Network (see step 4), the appropriate Pro:Centric server configuration must be completed to enable TV E-Z Installation (configuration Pro:Centric Mode...
  • Page 62 IP Environment Setup (Cont.) (Continued from previous page) a) The Server Address field provides the option to specify the domain name of the Pro:Centric server instead of the server’s IP address. Select/highlight the Server Address field and press the Wheel (OK) button on the Installer Remote. Then, use the Up/Down arrow keys to select either IP Address or Domain Name from the drop-down list of options for defining the server.

  • Page 63: Media Share Setup

    : Allows guests to use the TV to access and view Network ® data shared either by wired DLNA Certified devices connected to the same LAN as the TV or by wireless LG devices using LG’s Pro:Centric ® Smart Share application with Wi-Fi Direct Smart Share Disable ®...
  • Page 64 IP Environment Setup (Cont.) (Continued from previous page) • To enable use of a randomly generated security key for SoftAP access, set the Use Default field to “Enable” (the Security Key field will subsequently be grayed out and the random security key will be displayed).

  • Page 65: Pre-Loaded Applications

    IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display in the TV’s Smart Launcher, which appears along the PRE-LOADED... bottom of the screen. Network When the Pro:Centric application is disabled, the Smart Launcher is available to end users via the PORTAL button on the remote control.

  • Page 66: Updating Tv/Ptc Software Using A Usb Memory Device

    Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.
  • Page 67 Reference: Updating TV/PTC Software using a USB Memory Device (Cont.) (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also note that Diagnostics is for service use only. 5. If more than one USB memory device is currently connected to the TV, be sure to select the USB device that contains the software file you wish to use.

  • Page 68: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 65EV960H Item 099 Back Lighting Power Percent (Static) Consumption (Watts) Savings 263.0 247.0 233.0 220.0 205.0 188.0...

  • Page 69: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Installer Installer Menu 0x41 SOURCES CURRENT AV Menu Item ENABLED (R/W) SOURCE (R) SOURCE (R) 046 START AUX SRCE Installer Installer...

  • Page 70: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the Aux Inputs Values table on the following page.
  • Page 71 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 72: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its current mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 73: Using The Tv's Zoning Features

    Reference: Using the TV’s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the EV960H model TVs. These features are primarily intended for use when the TV is configured for FTG Mode operation; however, Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and Setup Menu profile Zone assignments), may also be used with TV cloning processes using a Clone (.tlx) file.
  • Page 74 Reference: Using the TV’s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the Channel Map web page overview on page 54. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
  • Page 75 Reference: Using the TV’s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Configuration A location-specific Wi-Fi configuration / Clone (.tlx) file may be saved (exported) from a Master TV and then be used to configure Target TVs. First, the wireless network (i.e., the access point login data) must be configured in the Master TV’s IP Environment Menu (see “Configuring a Wi-Fi Network Connection”...
  • Page 76 Reference: Using the TV’s Zoning Features (Cont.) (Continued from previous page) To change the TV Zone, select/highlight the TV Zone field and press the Wheel (OK) button. Then, use the Left/Right arrow keys to specify the desired TV Zone # (0–8). Press the Wheel (OK) button when you are finished.

  • Page 77: Using Media Share Features

    Smart Share with Wi-Fi Direct The following steps describe how to access and use Wi-Fi Direct (i.e., to connect to a wireless LG device). Remember that you must also turn ON Wi-Fi Direct and launch the Smart Share application on the LG device.
  • Page 78 GENERAL WI-FI DIRECT Picture Picture General / REFRESH LIST Sound Sound Language [TV]LG Smart TV Note: The example at left Room Info shows the General Menu when Channels Channels Time & Date the TV is in Pass-through Mode. Timers The Wi-Fi Direct screen is the...
  • Page 79 Reference: Using Media Share Features (Cont.) Screen Share (Miracast / WiDi) The following steps describe how to access and use the Miracast / WiDi features. Note: This procedure describes how to access Screen Share from the TV’s Smart Launcher. If the TV is not in Pass-through Mode, it is also possible to access Screen Share from the TV’s General Menu.
  • Page 80 Reference: Using Media Share Features (Cont.) (Continued from previous page) 2. Use the Left/Right arrow keys on the Installer Remote to select Wi-Fi Service, and then press the Wheel (OK) button. Note: If a message is displayed indicating that Wi-Fi service is not currently available, make sure a wired LAN connection to the TV has been established.

  • Page 81: Ev960H Jack Panels

    Reference: EV960H Jack Panels SERVICE  Typically used for downloading software updates, etc. PTC SERVICE (SVC ONLY) Restricted to service updates. HDMI IN 1 & 2 Connection for HDMI output OPTICAL DIGITAL AUDIO OUT from external device. Use for amps and home theater systems.

  • Page 82: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT 3.5 mm stereo jack on the EV960H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV.

  • Page 83: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 84: Tlm Communication Parameters

    Reference: TLM Communication Parameters RS-232C Configuration RS-232C IN (CONTROL) Port Pin Configuration RS-232C IN (CONTROL) Pin Number Description DB9 Serial Port on TV 3.5 V RXD (Receive Data) TXD (Transmit Data) IR Out from TV No Connection No Connection No Connection No Connection If your configuring device has a DB9 serial port, use a DB9-Female to DB9-Female null-modem crossover cable to connect the device to the TV.
  • Page 85 Reference: TLM Communication Parameters (Cont.) Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV (j, k, m or x). [Command 2] Second command to control the TV. [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in the General Menu. Adjustment range is 1 to 99.
  • Page 86 Reference: TLM Communication Parameters (Cont.) TLM Command Detailed Descriptions Note: Commands may work differently depending on model and signal. 01. Power (Command: k a) Transmission • To control TV power (ON  / OFF).  * [k][d][ ][Set ID][ ][Data][Cr] Transmission Data 00: Screen Mute Off (Picture On) [k][a][ ][Set ID][ ][Data][Cr] Video Mute Off Data 00: Power Off...
  • Page 87 Reference: TLM Communication Parameters (Cont.) 07. Brightness (Command: k h) Transmission To adjust screen brightness. You can also adjust screen [k][l][ ][Set ID][ ][Data][Cr] brightness in the Picture Menu. Data 00: OSD Off 01: OSD On Transmission [k][h][ ][Set ID][ ][Data][Cr] [l][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 64 12.
  • Page 88 Reference: TLM Communication Parameters (Cont.) • 15. Equalizer (Command: j v) Digital Antenna/Cable [Data0]: Physical Channel number  * To adjust EQ of the TV. − Antenna (DTV): 02  –   4 5 (Decimal: 2  –   6 9) Transmission − Cable (CADTV): 01 ...
  • Page 89 Reference: TLM Communication Parameters (Cont.) 17. Channel Add/Delete (NTSC) (Command: m b) 20. Input select (Command: x b) To set the saved channel status. To select input source for main picture.  * Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00: Delete Data...
  • Page 90 Reference: TLM Communication Parameters (Cont.) Key Codes The following table provides key codes for a typical LG Installer Remote. Note: Some keys are not applicable to all models. Code Function Code Function (Hexa) (Hexa) PAGE (Green) PAGE (Red) (Yellow) (Blue)

  • Page 91: Troubleshooting

    If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG representative. 206-4322...

  • Page 92: Commercial Mode Check

    Troubleshooting (Cont.) Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press the button on the Installer Remote.

  • Page 93: Glossary Of Terms

    Refers to a particular commercial mode of like analog channels, to be tuned without re- elements. The proper Admin Client must be operation within an LG TV. See also FTG quiring the dash key. Also, channels (analog used in accordance with licensed (Java or Mode.

  • Page 94: Notice

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon e-mail request to opensource@ lge.com.

  • Page 95: Back Cover

    Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric, Smart Share, and the “LG” logo are registered trademarks of LG Electronics Inc. DLNA Certified is a registered trademark of Digital Living Network Alliance. Intel is a registered trademark of Intel Corporation in the U.S.

Table of Contents