LG Pro:Centric 32LT560H Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. 32LT560H
  6. Setup manual

LG Pro:Centric 32LT560H Setup Manual

Hide thumbs Also See for Pro:Centric 32LT560H:
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2019 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric 
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
32LT560H
43LT560H
49LT560H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 12 – 20
Custom Master TV Setup
pages 35 – 37
Cloning Procedures
pages 38 – 43
P/N: 206-4339 (Rev A)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG Pro:Centric 32LT560H

Summary of Contents for LG Pro:Centric 32LT560H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 12 – 20 Custom Master TV Setup pages 35 – 37 Cloning Procedures pages 38 – 43 P/N: 206-4339 (Rev A) © Copyright 2019 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its Follow all instructions. appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced Do not use this apparatus near water.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Table of Contents Cloud Configuration Tool Overview ... . . 44 – 49 Safety Warnings ........2 Important Safety Instructions .

  • Page 6: Commercial Mode Overview

    TV’s CPU or Protocol Translation Controller (PTC) or it resides in a Pro:Centric application or an external device from the solution provider. These TV models support several different operational modes: LG’s Free-To-Guest (FTG) Mode via the TV CPU or Pass-through Mode (default). When in Pass-through Mode, these TV models can also be externally controlled via Multiple Protocol Interface (MPI) or TV-Link Tuner (TLT) interface (RS-232C).

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to PTC INSTALLER MENU the default values as required. If necessary, familiarize yourself with xxLT560H the Installer Menu and how to make and save changes.
  • Page 8 • TV Zoning (including channel restrictions by Zone) option for location-specific configurations. LG’s Cloud Configuration Tool enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. Configuration utilities enable you to create/edit an FTG Channel Map and configure Installer Menu settings.

  • Page 9: Determining The Tv Operating Mode

    Commercial Mode Overview (Cont.) Determining the TV Operating Mode To determine the operating mode of the TV, press MENU SETTINGS on the Installer Remote. The menu displayed depends on the operating mode. See examples below. If the Function Menu appears, the TV is in a mode (FTG, PPV, etc.) that does not allow the end user to change the fundamental TV setup.

  • Page 10: Pro:centric Operation

    Interactive Menu Navigation An LG Pro:Centric-capable TV remote control provides access to both interactive menus and regular TV features. Press PORTAL on the remote to access the interactive menus. Example: Pro:Centric Java (GEM) Application Portal...

  • Page 11: Pro:centric Java Application Setup

    Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java (GEM) application operates in conjunction with FTG and PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide.

  • Page 12: Ez-Manager Wizard

    EZ-Manager Wizard The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual) of configuring the essential Installer Menu items for Pro:Centric operation. The wizard will appear on the screen each time the TV is turned ON, until one of its configuration methods has been completed or the wizard is exited.

  • Page 13: Tv Configuration Options

    EZ-Manager Wizard (Cont.) (Continued from previous page) EZ-Manager Wizard Welcome to LG’s EZ-Manager Wizard • Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation or to configure the TV using a USB memory device. Select ‘Next’ to continue.

  • Page 14: Zone And Room Number Assignments

    EZ-Manager Wizard (Cont.) (Continued from previous page) Use the Left/Right arrow keys on the Installer Remote to navigate between options on this screen. Each time you select/highlight one of the following options, the screen text and fields will change in accordance with your selection. •...

  • Page 15: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) (Continued from previous page) To change the TV Zone from its default value (0), navigate to the Zone field at the left of the screen, and use the Up/Down arrow keys to specify the desired TV Zone # (1–8). •...
  • Page 16 EZ-Manager Wizard (Cont.) Automated Pro:Centric Configuration Note: If the server is not yet configured on the system or if Pro:Centric data delivery will be over IP and there is no Domain Name System (DNS) server, use the manual configuration option to configure the TV’s Pro:Centric server settings (see “Manual Pro:Centric Configuration”...
  • Page 17 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select Manual Pro:Centric at the bottom right of the screen, and then press OK. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.

  • Page 18: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) IP Configuration a) In the Media Type field, use the Left/Right arrow keys to select IP. Note: When you select “IP” as the Media Type, the default (RF) Data Channel and Signal Strength/Quality fields are replaced with (IP) Address and Port fields. b) In the Address and Port fields, either key in or use the Left/Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number.
  • Page 19 EZ-Manager Wizard (Cont.) Before You Begin • If you intend to use the Zoning feature on this TV, make sure to set the appropriate TV Zone # in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with USB Configuration.
  • Page 20 EZ-Manager Wizard (Cont.) (Continued from previous page) 3. Select the appropriate option from the TV Manager, and initiate the desired download(s). Update progress will be displayed on the screen. Do NOT remove the USB device while updates are in progress. When the update process is finished, depending on the type of update(s) completed, either the EZ-Manager TV Configuration Options screen will be redisplayed (software and/or boot logo image updates only—see also note below) or the TV will tune according to the Start Channel setting in the Installer Menu (TV configured with...

  • Page 21: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: •...
  • Page 22 Ez Download Utility (Cont.) (Continued from previous page) 3. If the TV is currently in Pass-through Mode, you would like to transfer (import) a “.tlx” file to the TV via the Ez Download utility, and you intend to use the TV Zoning feature, set the appropriate TV Zone # in the TV at this time.
  • Page 23 Ez Download Utility (Cont.) (Continued from previous page) TV MANAGER EZ Download [TLX] ChMap_IM.tlx Apply [LOGO] BootLogo.jpg [EPK] CPU_SW.epk Channel Tuning / Channel Banner Display Logical Physical Back 7. To select or de-select a file, respectively, use the Up/Down arrow keys on the Installer Remote to highlight the filename, and press OK to add or remove the checkmark at the left of the filename.
  • Page 24 Ez Download Utility (Cont.) (Continued from previous page) 9. When you are ready to continue, use the arrow keys on the Installer Remote to select Apply, and then press OK. Update progress will be displayed on the screen. Do NOT remove the USB device while updates are in progress.

  • Page 25: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV using an FTG Configuration (.tlx) file created using LG’s Cloud Configuration Tool. Refer to the table on pages 27 and 28 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.

  • Page 26: Navigating Within The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 27 Installer Menu (Cont.) Installer Menu Items 000 through 071 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 28 Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function Value Range Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...

  • Page 29: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE When this item is set to 2, 3, 18, or 19, the TV also will reboot and Specifies entry sequence to the Installer Menu. initiate an update event once every 24 hours. During the update event, the TV, as applicable, performs a Data Channel Auto Search 0 = 9876 1 = 4321...
  • Page 30 Installer Menu (Cont.) 016 - EN. TIMER (Enable On/Off Timers) NOTE: For items 007, 008, and 009 If set to 1, the Timer function is enabled and available to the end For legacy reasons, the scale used is 0 – 63. The PTC software user.
  • Page 31 Installer Menu (Cont.) Map (PTC-CTV Mode)/CPU channel lineup (CPU-CTV Mode) Note: In order for auto-sensing to be enabled for an input, that is locked, and user access to channel settings in the TV setup input must also be enabled in the Installer Menu. For example, to menus is restricted.
  • Page 32 Installer Menu (Cont.) 073 - CH NOT AVBLE (Channel Not Available) 090 - KEY LOCK If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL If set to 1, Key Lock is enabled, which means that the display panel NOT AVAILABLE”...
  • Page 33 Installer Menu (Cont.) 098 - PRO:CENTRIC 104 - START MINOR CHANNEL Selects the Pro:Centric Application Mode. Set to 0 (default) When a digital (ATSC) Start Channel has been specified for item to disable the Pro:Centric application. Set to 2 for GEM (Java 004 STRT CHANNEL, this item sets the Minor Start Channel Application) Mode.
  • Page 34 Installer Menu (Cont.) Note: Pro:Centric updates are downloaded from the Pro:Centric 122 - UPDATE TIME MN server to the TV when the TV is turned OFF. While Pro:Centric Set the Wake For Update minute from 0 to 59. See also description updates are in progress, it is not possible to turn ON the TV.

  • Page 35: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode.

  • Page 36: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state.
  • Page 37 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press MENU PICTURE SETTINGS on the Installer Remote to access the TV setup menus, and then set Picture, Sound, Channels, etc. options to the desired Picture configurations.

  • Page 38: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 39 Cloning Procedures (Cont.) (Continued from previous page) TV MANAGER Ez Download Diagnostics Download Boot Logo Update TV Software Update PTC Software Import Clone File Export Clone File Back 6. Use the Up/Down arrow keys to select Export Clone File, and then press OK. Clone file parameters will be displayed on the screen.

  • Page 40: Importing A Clone File

    Cloning Procedures (Cont.) (Continued from previous page) 9. Press OK to return to the TV Manager. To return to program viewing, press on the Installer Remote. 10. Remove the USB memory device from the Master TV. Note: If the Master TV has a channel lineup, during the export process, logical channel numbers are automatically assigned in ascending order, starting with 0 (zero), to the physical RF channels of the TV channel lineup to create an FTG Channel Map.
  • Page 41 Cloning Procedures (Cont.) (Continued from previous page) • If an FTG Configuration (.tlx) file (created in the Cloud Configuration Tool) contains an FTG Channel Map, each logical channel number in the FTG Channel Map has been assigned a physical RF channel or an Aux input (the latter designated by 130-0 through 137-0—see also Reference section, “TV Aux Input Configuration”).
  • Page 42 Cloning Procedures (Cont.) (Continued from previous page) TV MANAGER Ez Download Diagnostics Download Boot Logo Update TV Software Update PTC Software Import Clone File Back 7. Use the Up/Down arrow keys to select Import Clone File, and then press OK. 8.
  • Page 43 Cloning Procedures (Cont.) (Continued from previous page) Note: If the “.tlx” file does not include an FTG Channel Map, the message, “No Channel Map in Clone file,” will be displayed at the right of the screen. 10. When you are ready to continue, press OK on the Installer Remote. Import progress will be displayed on the screen.

  • Page 44: Cloud Configuration Tool Overview

    Cloud Configuration Tool Overview This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG Mode configuration. For best results, it is recommended that you access the Cloud Configuration Tool ® using one of the following web browsers: Google Chrome™ 51 or later or Mozilla Firefox ...
  • Page 45 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) • If you are creating an FTG Configuration file from scratch and this is your first time using the Cloud Configuration Tool, you may wish to select the Wizard Setup, which will guide you through the essential steps of creating the file, i.e., creating the FTG Channel Map and/or the Installer Menu profile(s).
  • Page 46 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) 3. If you need to edit the FTG Channel Map from an existing file (see previous step) or create a new FTG Channel Map, click on CHANNEL MAP in the menu options bar at the top left of the page to access the Channel Map web page (see example on page 48), and edit/create the FTG Channel Map.

  • Page 47: File Manager Web Page Overview

    Cloud Configuration Tool Overview (Cont.) File Manager Web Page Overview The File Manager page (displayed after you select ADVANCED SETUP from the Welcome page) enables you to compile, modify, and save (export) FTG Configuration (.tlx) files. The following example provides an overview reference of the functions available on the File Manager page. Data contained in uploaded FTG Data to be saved in the FTG Configuration (.tlx) file.

  • Page 48: Channel Map Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Channel Map Web Page Overview On the Channel Map page, you can create, view, and edit a Logical Channel Map. Click the RF CHANNEL button Search for existing channels or to add a new RF channel to clear the FTG Channel Map.

  • Page 49: Installer Menu Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Installer Menu Web Page Overview Load default Installer Menu for selected model. Assign Zone as applicable. Once you click on CREATE (Advanced Setup only) Cloud PROFILE, this Installer Menu profile will be listed under Configuration Tool menu bar the Installer Menu Profile List, and Installer Menu items provides access to all utilities.

  • Page 50: Ip Environment Setup

    IP Environment Setup (Cont.) The IP Environment Menu enables you to set up the network features of the TV. If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 35 to 37), all IP Environment settings, with the exception of the network settings, may be cloned.
  • Page 51 IP Environment Setup (Cont.) (Continued from previous page) By default, the TV uses DHCP, and if a LAN is detected, the TV will request an IP address from the DHCP server on the network NETWORK SETTING as soon as you select START CONNECTION. If the TV is able to connect to the network, a “Wired network is connected”...

  • Page 52: Network Status

    IP Environment Setup (Cont.) Network Status This option enables you to check the status of the network connection. 1. With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select the Network menu option. Then, press OK.
  • Page 53 IP Environment Setup (Cont.) (Continued from previous page) 3. Refer to the appropriate subsection below to configure the TV’s Pro:Centric settings to match those of the Pro:Centric server. While the Pro:Centric application itself is an additional feature (see step 4), the appropriate Pro:Centric server configuration must be completed to enable TV E-Z Installation (boot logo, configuration, and software) data downloads and, if configured, the Pro:Centric application download.
  • Page 54 IP Environment Setup (Cont.) (Continued from previous page) Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the EZ-Manager Wizard, the specified mode will be reflected in this field. If you change the mode in this menu, Installer Menu item 098 will now reflect the value you selected here.
  • Page 55 Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 21 to 24 for further information.
  • Page 56 EPK: ##.##.## [Forced Update Option] SPI Boot LG Boot LOGO CPU_SW.epk 5. Use the Up/Down arrow keys to select/highlight the update file to download. Then, press OK. Note: Do not select Forced Update options unless you have been specifically instructed to do so or have previous experience with Expert Software Updates.

  • Page 57: Device

    Reference: Downloading a Boot Logo Image using a USB Memory Device This section describes how to download a boot logo image using the TV Manager “Download Boot Logo” option, though you may also use the Ez Download utility to download the boot logo, if desired.
  • Page 58 Reference: Downloading a Boot Logo Image using a USB Memory Device (Cont.) (Continued from previous page) 4. Use the Up/Down arrow keys to select Download Boot Logo, and then press OK. TV MANAGER Download Boot Logo BootLogo.jpg BootLogo_ProC.jpg Back 5. In the Download Boot Logo screen, use the Up/Down arrow keys to select the image file to download, and then press OK.

  • Page 59: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 32LT560H 43LT560H 49LT560H Item 099 Back Lighting Power Power Power Percent Percent Percent (Static) Consumption Consumption Consumption Savings Savings...

  • Page 60: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DIRECT ACCESS DATA STATUS STATUS TYPE TYPE 0xD2 Tuning Installer Installer Menu TYPE 0x0D 0x41 SOURCES CURRENT AV Menu Item AUX SOURCE (R) ENABLED (R/W) SOURCE (R) 046 START AUX SRCE Installer Installer...

  • Page 61: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the table on the following page.
  • Page 62 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 63: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/ password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 64: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature This section describes the TV Zoning feature available with the LT560H model TVs. The TV Zoning feature enables you to create localized configurations for TVs in selected “Zones” within the installation site, for example, a hotel lobby, fitness center, restaurant, etc. This feature is primarily intended for use when the TV is configured for FTG Mode operation.
  • Page 65 Reference: Using the TV Zoning Feature (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the Channel Map web page overview on page 48. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
  • Page 66 Reference: Using the TV Zoning Feature (Cont.) (Continued from previous page) To change the TV Zone, navigate to the Zone field, and use the Up/Down arrow keys to specify the desired TV Zone # (0–8). • Label: Allows you to select a North, South, East, or West text label for this TV. Navigate to the Label field, and use the Up/Down arrow keys to select the applicable label.

  • Page 67: Lt560H Rear And Side Jack Panels

    Reference: LT560H Rear and Side Jack Panels Use for network connection (i.e., for Pro:Centric data). HDMI IN 1 SPEAKER OUT Connection for HDMI/DVI LINE OUT output from external device. (3.5 mm jack) Connect external audio (fixed speaker, variable speaker, or fixed line level [amplifier]) equipment.

  • Page 68: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the LT560H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV.

  • Page 69: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 70: Tlt Communication Parameters

    Reference: TLT Communication Parameters RS-232C Configuration RS-232C IN (CONTROL) Port Pin Configuration RS-232C IN (CONTROL) Pin Number Description DB9 Serial Port on TV 3.5 V RXD (Receive Data) TXD (Transmit Data) IR Out from TV No Connection No Connection No Connection No Connection If your configuring device has a DB9 serial port, use a DB9-Female to DB9-Female null-modem crossover cable to connect the device to the TV.
  • Page 71 Reference: TLT Communication Parameters (Cont.) Transmitting / Receiving Protocol This communication protocol transmits and receives 1-byte ASCII data representation for each Command, Set ID, and Data character. Therefore, a standard ASCII terminal program can be used to send and receive the protocol.
  • Page 72 Reference: TLT Communication Parameters (Cont.) Data Conversion (Hexadecimal : Decimal) In cases where decimal values are shown in commands, refer to following conversion examples to enter the [Data] value in the terminal program as hexadecimal. Note: The Channel Tune (ma) Command uses two-byte hexadecimal values ([Data]) to represent the channel number.
  • Page 73 Reference: TLT Communication Parameters (Cont.) Acknowledgment Acknowledgment [e][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) 05. Volume Control (Command: k f) To adjust the screen sharpness. To adjust volume. Command Structure Command Structure [k][k][ ][Set ID][ ][Data][CR] [k][f][ ][Set ID][ ][Data][CR] Data Min: 00 to Max: 32 Data Min: 00 to Max: 64...
  • Page 74 Reference: TLT Communication Parameters (Cont.) 14. Color Temperature (Command: x u) [Data1  –   4 ]: Major/Minor Channel number − Data1 & Data2: xx (Don’t care) To adjust color temperature. − Data3 & Data4: xx (Don’t care) Command Structure [Data5]: Input Source (Analog) −...
  • Page 75 Reference: TLT Communication Parameters (Cont.) 20. Input select (Command: x b) Acknowledgment To select input source for main picture.  * [a][ ][Set ID][ ][OK][Data 0][Data1] Command Structure [Data2][Data3][Data4][Data5] [x][b][ ][Set ID][ ][Data][CR] [x][a][ ][Set ID][ ][NG][Data0][x] Data 00: DTV 01: CADTV 17.
  • Page 76 Reference: TLT Communication Parameters (Cont.) Key Codes The following table provides key codes for a typical LG Installer Remote. Note: Some keys are not applicable to all models. Code Function Code Function (Hexa) (Hexa) PAGE (Green) PAGE (Red) (Yellow) (Blue)

  • Page 77: Troubleshooting

    If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG dealer. 206-4339...

  • Page 78: Commercial Mode Check

    Troubleshooting (Cont.) Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU SETTINGS on the Installer Remote.

  • Page 79: Glossary Of Terms

    Cloning Pro:Idiom Refers to a particular commercial mode of The process of capturing a Master TV operation within an LG TV. See also FTG Zenith proprietary security software that Setup and transferring it to a Target TV Mode. unlocks access to premium content to help using a USB memory device.

  • Page 80: Notice

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.

  • Page 81: Back Cover

    1-888-865-3026 www.lg.com/us/business Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric and the “LG” logo are registered trademarks of LG Electronics Inc. All other trademarks or registered trademarks are the property of their respective owners. 206-4339 © Copyright 2019 LG Electronics U.S.A., Inc.

This manual is also suitable for:

Pro:centric 43lt560hPro:centric 49lt560h

Table of Contents