Connecting the DWL-810 in Ad-Hoc
Mode
Configuration of the DWL-810 is needed if your setup is similar to Setup #2.
Web-based Configuration
Before You Begin the Configuration
It's best to use a computer (with an Ethernet adapter) that is connected directly to the
DWL-810 for configuration. The default IP address for the DWL-810 is
a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP
address within the same range as the DWL-810's IP address in order to configure the
DWL-810. See the Appendix in this Quick Installation Guide if you need assistance
in assigning a Static IP address.
Open your Web browser and
type
"http://192.168.0.30"
the URL address box. Then
press the Enter or Return key.
Setup #2
into
192.168.0.30
with